Print Page - Solo Pro Flybar Modification

Title: Solo Pro Flybar Modification
Post by: gbisht on May 28, 2011, 12:40:41 AM

Hi RC lovers,

I am using Nine Eagle Solo Pro V2, and this heli is good for starting 4-CH. but the problem with this heli is its flybar are very flexible, so flybars strike on canopy when you do fast transitions. So make flybar hard or non- flexible I used ear buds stick and make them little bit shorter then original

Title: Re: Solo Pro Flybar Modification
Post by: sunk? on May 28, 2011, 01:09:12 AM

hi mate,
did this solve the problem of striking the canopy?
regards
don

Title: Re: Solo Pro Flybar Modification
Post by: gbisht on May 29, 2011, 01:18:16 AM

Yes but not that much... ..and also not that much hard ;)

but be carefull when u modify flybar....after modification flybar should be equal from both side
and also blanced.

Find attached image for its balance

Title: JC Helicopter parts insted of Solo Pro
Post by: gbisht on May 29, 2011, 08:48:13 AM

Hi buddys,

If you having solo pro and want spare parts for repair, so you can order JC Helicopter Model No 9C2002 insted of Nine Eagle Solo Pro V2.

JC Heli parts are cheapter compair to Nine Eagle

JC Parts
http://www.helipal.com/spare-part_jc-helicopters-parts_9c002.html

Solo pro
http://www.helipal.com/spare-part_nine-eagles-parts_solo-pro.html

RC India

RC Models => Helis => Topic started by: gbisht on May 28, 2011, 12:40:41 AM