Hello friends,

If u have a Syma s107g heli and facing a problem, pls feel free to post,
let us discuss it here and try 2 solve the problem.

Hello friends,

If u have a Syma s107g heli and facing a problem, pls feel free to post,
let us discuss it here and try 2 solve the problem. 

Mym..  i hope only a very few are holding some RC models from Syma, as this one is not freely available in our country..!!

As it is one of the best selling model in micro helis, I am positive to get response...

 

 

Hey mym,

i wanna buy one of these birds:) so can you suggest some of the options availaible IN India?...
'Coz i don't want custom hassels

-regards
Bilal

go to any large duty paid shop..try for Syma, or Airhogs.. if not found, look for a good one with nice finishing, check it once from there, pay about 650 to 800/-Rs..back home happily..and fly it.. have nice flights..

And one more thing,

i have been reading about this particular heli lately, and in one of the mods i came across, the author, Matt suggested putting a 'fresnel' lense, or any other lense for that matter(eg magnifying glasses;)), at about 2 cms in front of the IR LED's of the transmitter. This, he said helps in focussing the IR beam from the Tx from a wider one to a sharper narrow one, which, he claimed, increased the range of the stock Tx to about 25+ meters.

This, I want to admitt, is something really unique that step out of the rest of the mods like removing flybar weight and replacing the tail rotor with one from the 'picooz' heli etc, that keep popping up every now and then.
So, what i want to ask is, Is this possible?...and Is their any other way to increase the range of these  IR Txs?

you can also increases the range by adding high power IR leds.. all possible..

Thanx Roopesh Sir for your prompt reply:)

actually i have tried my hands on a couple of these coaxial helis, with gyro and without it, but now after reading so much about Syma s107g, i want to fly this one too...thatsy i want to buy a Genuine Syma s107g

-regards
Bilal

Roopesh Sir,
what will happen if I connect another arrey of 3 LEDs in seriese, in parellel were the current LEDs are connected in the Tx?...will this effect the Tx in any way?

Sir, i think you should start another thread on 'IR Tx mods'....its really appreciated:)

Bil.. you can add high power IR leds to the TX, by adding a transistor, as 2SC 914, or D 8050, or D 8550.. etc.. will increase the range.. can also add a infra red screen to fly in day time..will add an article..

Thanx Sir

will be following you on this

sure..its all easy Bilaal..

Hi Bilal,

Before buying Syma s107g I searched a lot in my own city, then Indian online stores and after that in big toy stores across Mumbai, but unfortunately I didn't succeed (may b I didn't reached the right store)

But one day my friend told me about its availability at a local toy store. And alas I got it...

I searched many online stores again in India, as u r interested,  but sorry to say they still don't have it here.

Its available here in city....

Where exactly did you get it? Which shop?

hi Swapnil, its at Gaysons near Variety square.....

How much did it cost you?

Swapnil,
reffering to Mym's other post on Syma heli, i found that he bought the heli in Rs 1650

That's right..

At the 53rd pre-flight inspection I noticed that one of the connect buckle was missing, I still decided to fly the heli.

Observation: It can fly with a single connect buckle without any problem.

And I am still flying it...

Here's the pic..

Hey Mym,

now that you have completed 53 successful flights, are their any plans to further mod this heli?

Oh yes ofcourse,

I am looking forward to go for a battery mod. For that I wud need 1s 3.7V 160mAh lipo batteries and a suitable charger