Hi Everyone 

I recently purchased a MT from Model art and I am planning to build it now .

The motor , ESC and Gyro are the stock ones .

On the Cylics i am using
3 * Metal gear turnigy servos 9g
1 * Ace R/C servo , came with the kit (  surprisingly  )

I will be using a Turnigy 2200mAh 11.1v battery .

Will keep you people updated 

I wanted to know from everyone , What should be the belt tension for training because the manual says that not more than 5mm free play but few people told me it should be as loose as possible but it shouldn't skip a tooth . Any comments ?

See a few posts starting from this one :

http://www.rcindia.org/helis/hk-450-mt-build-thread/msg14480/#msg14480

According to the pics and insturctions on that post , my belt tension is set correct then . Though Gaurav bhaiya told me that if the two belts touch it shouldn't matter

Hey everyone ,
I have an issue , after i throttle above 40% my whole heli's vibrating any suggestions on what to do ?

It has periodical vibrations after about every 1.5 - 2 seconds  after crossing 40% throttle . P

That is normal. As I said yesterday DO NOT attempt to hover without getting assistance.

Ok . I thought it had something to do with blade tracking

Hey everyone , Please assist me with setting my Pitch and Throtle curves

This was discussed in a lot of detail in this thread.

http://www.rcindia.org/helis/thunder-tiger-mini-titan-arf-pro-build/msg12883/#msg12883

Let us know what particular clarification you need after going through the posts above.

Gaurav Bhaiya suggested a few things i should do like -
- Loosen the main rotor blades
- Loosen tail rotor blades
He also suggested as the CCPM/Gyro is controlling the cylics , My transmitter (6EXHP) should be turned to Airplane mode , and the Pitch and Throttle curves should be de-activated . Any idea how i could turn it off on my TX ?

Just set the type to "1-5" in the swash (SWSH) menu.  That should be the default, so you would be OK already.

I am of to Bangalore , so i will be inactive till 19th , I will get back on the MT as soon as im back
Thanks

Hey everyone ,
I have been hovering from the past week and have managed to hover it for 4 minutes without any break 
Today i thought why not hover on my terrace and see how it goes in a smaller and much safer place and i was able to hover it around for quite a while .... Until ... The neighbours servants son saw the heli flying from the next houses terrace and started screaming to his dad . His dad just completely ignored him and he threw a stone at my heli , his aim was really perfect . It hit the main blades , and they broke .   

Fortunately only the main blades were damaged and nothing else . Now i need replacements !!! 
Does any one know from where i can get them ? And wheather align blades would also work ? 
Thank you all ,
Sahevaan

Quote from: Sahevaan on June 23, 2010, 08:06:55 PM
His dad just completely ignored him and he threw a stone at my heli , his aim was really perfect .

          Is the gentleman out of his mind, to do something senseless like that ? 

Any 325mm (or similar sized) blades should work, including the Align ones.

Man o Man o Man...... This dad needs a spanking.... Take a stone and tie it to you know what and push him down his terrace....

I think he is mental.

Well now i need to buy new blades . Hope the repair doesn't cost a lot :\

Quote from: Sahevaan on June 23, 2010, 08:06:55 PM
His dad just completely ignored him and he threw a stone at my heli , his aim was really perfect .

What a moron!!

True
Anyways wont the align blades be different in thickness and the holes for mounting

Some blades do require the "rubber spacers". Please wait till someone like RotorZone/Rajesh comments, as they have much more experience with the MT.

I have read on another site , it worked well with the MT .

Quote from: Sahevaan on June 23, 2010, 11:11:20 PM
I have read on another site , it worked well with the MT .

Sad incident really. PLus congratulations on your hover.
Get the woodies from Rotor Chennai or the TT dealer in Bangalore.
TT Woodies are expensive, but then you shouldnt plan on crashing much, now that you are able to hover .

-GA

Ask that "dad" to buy new blades and some spares for you. And tell him that his son broke an expensive set of blades and lots of parts were broken.

If he is not willing to get them, then you throw a stone at his cars windscreen or house window, which ever glass is costlier.

All the best for your AIM   

Preaching violence... and eye for an eye