Any one in Mumbai who can help me to assemble my HKJ 500 CCPM 3D heli.

Major Challenges:

Configuring servos to get 90 degree alignment
and tx configuration

Please help me to assemble this heli, i am stuck from last 15 days on this.

Reply back or drop a note on

Appreciate your help.

Cheers,
Kunal Ranawat

which tx are you using?..

HK 6ch

Kunal, I'd say you better buy a proper tx / rx with better capabilities, the HK tx is not such a good option of this size of Heli.

I am done assembling the bare-bone with a custom made tail boom, will be plugging in the servos, gyro, ESC and Motor this weekend. Still need to buy the tx/rx and the battery

Can you share some pictures of your heli here, it will help me a lot. Also which battery you are using for this one ?

This is my configuration:
urnigy Typhoon 500H Heli Motor 1800kv (500 Class)

HK-7X 2.4Ghz 7ch w/ 5 Model Memory TX & RX V2 (Mode 1)

HK-T500 Motor Pinion Gear 12T/13T (1set)

GWS Naro Super 19g Digital Servo/JR & Gyro

TURNIGY Plush 80A w/ UBEC Speed Controller

Turnigy MG930 Digital Metal Gear Servo 3.6kg / 26g / 0.14sec  - 4 Pieces

Digital high torque bearing servo 42g/5.8kg/.12sec

Turnigy 3300mAh 6S 30C Lipo Pack (Great for T-rex 500)

Turnigy Accucel-6 50W 6A Balancer/Charger w/ accessories


Which tx do you propose??

i have two more options to look at: