HomeMade rubber band powered plane

Started by coderbanna, May 02, 2012, 08:24:21 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

coderbanna

Hi guys here is my rubber band powered airplane, made from stuff available in home...

it flies good as shown in the videos, i dont have enough space to fly so tested in lobby, it goes around 20-30 feet, however if you have better rubber you can have better flights.





and images :)
Even if i say halalujah, it aint fly...

karan3_k


VC

Video links have been posted above. She seems restrained indoors and needs a bigger place to fly - take her out coder - all the best!
Growing old is mandatory, growing up is optional!

satz flying

very simple and light weight plane.
Trust yourself

karan3_k

ps...outdoor video

sory forget to type outdoor...

just cz m interested in trajectory of flight...

satz flying

Trust yourself

coderbanna

Quote from: karan3_k on May 02, 2012, 11:04:33 PM
ps...outdoor video

sory forget to type outdoor...

just cz m interested in trajectory of flight...

trajectory of flight depends on kind of rubber and thrust it gives, i am using 4 strands of rubber normal rubber band as a chain of 4 - 5 length, this runs only for 4 seconds or less and gives great thrust so plane goes up very fast and then glides down (i made it a little nose heavy), however with good quality rubber make it a little tail heavy.

i have tried it with  a little better single strand rubber, it gives more flight but less thrust, with it planes takes good slow flight but banks to left as i have made left wing heavier (with tape) so that it doesnt go straight as in for free flying planes we normally do.
Even if i say halalujah, it aint fly...

KALYANPRODHAN

Use Plastic Glass/Cup cut at 15O and paste with a stick piece to make prop.
Make prop Dia Appx 1/3rd times of wingspan.
Adjust Dia/Pitch = 1 (Finally with your rubber band power.)
Keep in mind :-Make less pitch, more RPM and more power less time and vice versa.
Use nylon type Semi transperent rubber band for more power and less weight. (Nylon Rubber) But best is TAN Sport, not available here.

Search F1D and you will get how to make lightweight frame. Plastic prop you used is tooo.. heavy. Use much thinner plastics like microfilm.

Good luck and thanks for trying this.

http://www.rcindia.org/kites-trains-free-flight-and-all-others/16-cm-wingspan-rubber-powered-plane-(lt1hr-time)/
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

KALYANPRODHAN

And more,
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

KALYANPRODHAN

Finally
Ice cream sticks forms plane.
We have to unite and to prove ourself to make indigenous products as well as marketing / Canvasing them. I'm sure we must achieve success if we try unitedly.

rohitgupta322

Be Inquisitive

kumardasai

Awesome Dude...Really great work especially about the prop adapter you made.
Blazer, Sky Surfer V3, Fun Jet, WLToys V913, WLToys V977, HiSky HCP 100S, Skyartech Wasp V3.

coderbanna

really nice plane :) better looking and more well made.

Even if i say halalujah, it aint fly...