Hi everyone
I built this RC FLYGUY 46" plans from RCGroups.com
Specifications
Material : 10 m.m. styro foam
Motor : 2200 kv Brushless outrunner
ESC: 50 Amp. Redbrick
LiPo: 2200 mah 3S 11.1v
Prop: 6x4 E
hi,
i too have built the same.
its a bit tricky to fly. in power mode it will keep turning to one side only.
keep power at 50% for testing.
regds
Hi Yes yesterday i maiden it, takeoff was good it climbs to good height but it was not turning to right or left and i crashed it.
Again i bulit it and discussed with its founder OTTO. he told the modifications i done that today morning i again flown it instead of going up it turns to right side and again crashed.
Finally Flown FLYGUY 46" successfully. will upload video soon :) :) :)
Congrats! Awaiting video!
Funny and entertaining concept well done, it has a commercial application if well executed
Eg, brands, political parties , movie promotion in a short stint for catching attention and delivering quick marketing message across
Gud one
Amazing Dr! Would love to see the video :)
Flying pictures
good to see it flying,
is it controllable now.
what mods done? mine is waiting for maiden.
regds
Here is the maiden video
Watch in HD
www.youtube.com/watch?v=kDrtKgnQG8I (//http://)
MOD EDIT
youtube link fixed
Beautiful.... :thumbsup:
@ Thanks Mr.Sbajare. please check your PM
@ Thank you Mr. Manojswizera :salute:
Good one Abhi. Looks very cool.
Man Of Steel @ 3.2sec. :hatsoff:
super cool build
man of balsa.....
Regards
Chintal
Rcmumbai.com
@ Johnywalker 8pm Thank you :)
@ Chintal Thank you :)
Most welcome
woww.. Super man flying Super {:)} {:)} Nice Build Dr. :hatsoff: :goodjob:
Thank you nitinraj :salute:
@agrawalabhi24
Sir,
I am so impressed that i would like to offer, for your consideration, my Lois Lane model daughter (non RC, non powered, whitish complexion of depron) as a suitable down to earth match for your high flying Man of Steel son.
Iyer sir
Ladki ka photo aur bio-data?
Jokes apart, that is a really well built model; very well flown too - it's difficult to fly. Kudos to Abhi :D
@ Iyer Sir Thank you very much and i accept your praposal :) :) :)
@ Sanjay Sir again thank you very much for appreciation :salute: :salute:
Well built. Nice :thumbsup: