After seeing the beautiful rc kites at www.goflykite.com of singapore and videos of night flying
http://www.youtube.com/watch?v=GX9RTPwIkG8
http://www.youtube.com/watch?v=Yo-1ZW5AAbc
http://www.youtube.com/watch?v=wa2RCygCDPk
http://www.youtube.com/watch?v=iOmIhApnO-s
I very much wanted to purchase one. But the price was almost 410SGD plus shipping was too much to pay for a kite.
While going through the site i decided to build the kite on my own
the frame is the result of that it just needs to be covered with material out of which umberella's are made.
It is a delta wing kite flying on elevons.
Regards
Subir
nice..nice.. {:)} {:)} {:)}
cool.. need to keep a tight watch on this thread... ;-)
Super!! What size CF rods are they, looks like 2mm :-\ it would be very helpful if you can post close-up of joints. PFA image
The CF rods are all 1.5mm as i had those lying around to make pushrods for my foamies the joints are just thread with CA
the hinges for the elevator are again CF rod with 3mmOD and 2mm ID. i have used 3mm rod in the moddle to give it strength
and avoid flex
the power will be provided by Turnigy 2730 Brushless Motor 1500kv with 7060 Prop
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=8618
and the Esc will be TURNIGY Plush 12amp (2A BEC)BESC http://www.hobbyking.com/hobbyking/store/__2161__TURNIGY_Plush_12amp_2A_BEC_BESC.html
with 2 HXT900 Servos and 3S 1000mah battery
i was give a idea by friend to use Aquarium airpipe connectors to make the frame they have an ID of 3MM
will try it for my next big kite
Subir
Hi Guys
Found out the Aquarium airpipe connectors they fit the 3MM CF rod perfectly, so no more thread and CA for fixing the joints
you get three types the T shape the L shape and the Cross, looking forward to seeing more Rc Kite builds.
Subir
I would love to see that in action btw where are you in delhi... I might peep in for first flight experience ;-)
Sure would love for u to join me at the maiden, we fly at noida. You can contact me on 9560604442
Today I am out to search for the umbrella cloth for covering the kite.
Subir
Finally completed the rc kite and did the maiden. there was a lot of flex bcoz of the 1.5mm Cf rods
i will now put a 5mm CF tube in the middle as fuse to counter the flex and let you know how it went
http://www.youtube.com/watch?v=uG-J4Hz6R1U
Subir
I have started building a new kite with 3mm CF Rod as center frame and 2.5mm CF for the
elevons and Front bumper . it will be twice the size of the prevoius build,
Subir
My new kite is ready it is 3MM centre frame and 2.5mm elevons and bumper, 2mm vertical stabalizer
I have used Aquarium airline connectors and made the kite completely flat used heat gun to bend the connectors to
desired angles.
Subir
The video i uploaded of the maiden flight of the kite got corrupted when i selected the enhancements option on Youtube
will be uploading the Video again
Subir
Here the video is posted again
http://www.youtube.com/watch?v=sf7emHUBwJU
Beautifully executed project {:)}
wow, :) the kite flies exactly like in simulator.