thanks a lot sir now the CG is coming about the accurate center i can change it just by moving the lipo..
didnt weigh it yet.. think it will reach almost 500gms  (400 expected)

should i want to keet the CG to 33%?
want to do a stringed test today... will upload the results.. thanks for your support sir.. 

A unpowered Glide test should give you rough idea about CG. Do it over thick tall grass area.

done gliding test in my home itself over pillows arranged.. 
glides good(i mean not that bad)
one of the guy from rcgroups advised me to reverse the rotation of gears dunno what will be the difference... 

best of luck for the maiden 

Quote from: swizera on December 31, 2012, 07:17:59 PM
best of luck for the maiden 

thanks yaar..
trying for some foam covering around the body so that it wont hurt in case of a crash..   

Arun, this build is really looking brilliant 

I just can't wait to see the maiden

congratulations on very very good going

thanks a lot sanjay sir.. i am truly flattered.. 
thanks for your support.. 

Fantastic Arun

Quote from: RcBharat on December 31, 2012, 08:54:57 PM
Fantastic Arun

thank you very much sir....

Ready for the maiden..

wingspan: 50"
length    : 33"(including tail)
weight    : not yet weigh( )
motor     : 3000kv outrunner(30 gms)
gear       : 2 stage gear reduction
servo     : turnigy metal gear servo(13gm)
esc       : 35A yellow ESC
body     :1.5mm frp sheet
wing spars : carbon fiber rods
wing membrane :  polyethylene film

extras : micro bearings, super glues, cycle spokes, bamboo sticks, ice cream sticks, duct tapes, nylon thread, magnetic wires, fevicol, many hand tools etc...etc..etc and a lot of time... 

Eagerly waiting for the maiden news.

Wishing you all the good luck.

All the very best!

Quote from: muradshak on January 01, 2013, 05:25:47 PM
All the very best!

thanks dude...

All the best Arun: have a great maiden  . When is it planned?

thanks a lot sanjay sir, within this week.. need to cover it up with some foam or thermocol for preventing crash damage..
looking up for a way...

now she is ready for the maiden.. covered up with some thermocol...
will be maiden it soon...

made a test flight yesterday... i cant say that it flies good but.. it can fly...There is some imperfections in my mechanism that i ignored or forget... which needs to be done for flying perfect...

Keep at it! It WILL fly! And well.

sanjay sir working on it... will update in sequence... 

nice build.. did it flew?

Still on the building stage... Installed new gear systems.. Now its better.. But not yet ready to fly..
But will i hope.. 

all the best.. if possible pls upload the plans and some building instructions...

hi arun ,
how much cost this slow hawk

Slow hawk?

You have mentioned that as the model you based your build on, in your very first post in this thread