@arun : lol.. keeping it simple! no bakwaas!

Sent from a potato using a lamp

@razzer yea thats the micro jst, i have provided female connector with its pins if you look closely. You just have to solder wires to them.

@arun bro you are right, that was my plan but i knew this would come up. hence i was forced to add those connectors in the kit too. If you see the RCG thread the cost mentioned includes motors controller and battery only.

@aniket i guess thats what sratch build is all about 'keeping it simple'

Soldering will be a good idea but i have provided the necessary connectors for you to use it.

dear satya,
got the kit yesterday. assembled kit and the total weight comes to 37grms with battery.

It is not climbing up. Verified the connection and CC/CCW configs...

If i off load the battery weight is climbing.. Is it my weight in higher side?...

37 Grams is good, did you fully charged the battery? Share some images build logs

Dear satya,
Thanks for the reply.

Will post the image once reached my home.
Do you have spare motors available with you?. need to order it.

In my last try yesterday night i have accidentally pulled off the wires making one of the motors useless.
(opened the motor and tried soldering it but not working in full load)

Shivela.. my quad weighs 32gms and climbing good.. still trying reduce the weight for good performance.. recharge the lipo it will climb up..
Make sure all motors are mounted at an angle 90degrees..

Sent from my Canvas using tapatalk 2

Thanks Arun,

Will get some help from you once i posted the pictures...in the evening...

@shivela Yea I have few motors, props and something new for sale. Will soon add it.

@arun very good point mentioned, motors need to be mounted at 90 deg angle. The guys in RCG have made a 60 CM quad using this kit and it weighs 27.5Grams w/battery

How they do it man? their quads are also mostly under 900 grams mine always goes more than 900 grams

They use gorilla glue, which is supposed to be much lighter than hot melt glue and for the motor mounts, they use epoxy and paper..

Do we get gorilla glue here? whats its name?

Unfortunately we don't get gurilla glue here....not that I know off....but pidilite makes a PU glue that foams when moisten, it is generally used bu auto body workers....but I haven't used it so can't say much

Why can't we use fevikwik for this kit? its very small and i am sure it will provide strength to hold all stuffs together. What say?

Yeah ofcorce......I guess no one pointed that out.....we were busy coying rather than using our own brains

actually with this kit we all should make something of your own. It would really be fantastic to see something different

Dear Satya,

I have used the Fewikwik only for the X arms and 4cmx 4cm balsa square board at the center.A bit of 5 min epoxy for strength.
Used 4 small sketch pen caps as motor holders and used 5 min epoxy for sticking it in the end of X arms.
Total time took 15 mins to complete.

I am waiting for my quad to up and running. Then will try out Coro (triangle shaped) to built X arms. Hope even Coro is fine for the center square.

Cool balsa is good actually i have heard that its very light weight. Do share image or build log. very good idea with the sketch pen caps. I have order some motor holders also (will be added for sale soon) so many guys who has problem find a way to fix the motor they can use that.

@satyagupta can these motors be put in a motor mount with a large gear and used to swing a larger prop? like on the other micro quads online.... ?

Sent from a potato using a lamp

here's my basic frame... 15cm motor to motor and coro top

PS: I finally figured out how to post pics with tapatalk ;D

Sent from a potato using a lamp

Looks good..

Hey everyone,
I just completed the quad but it is not taking off......it just lifts like an inch or two off the ground, that too on full throttle and then swiftly banks towards left and then flips......the AUW is 27 gms......can someone help?

Bilal bhai lipo fully charged??

Haan bhai.......I even charged it twice to be sure

Check  props and motors whether all r same and have good thrust

check alignment of board... is it flat and oriented properly?

So today i will make one more, that will give me idea how does this works. And also you guys can see it if you want to.