Wow arun,

Wonderful. Very stable and smooth...
This is perfect built we all waiting for....

What is your sepc. Seems motor bigger one...
Can we have some close pics about battery mount and pcb mount?

Thanks you deepak..

@shivela: thanks yaar..
  Motors are the same which satya provided 716
  Arms using 2.5mm cf rod
  Center plate is of I cream sticks
  Motor mounts are actually e-cig filters (vc sir's idea)
  And some super glue.. done
Its super stable flewed it outside today morning.. I am loving it now..
Frame pic attached

Thanks arun for the pics.

Any pics for  pcb and battery mounts..and the bottom side of the quad..

Controller board is v939?

Quote from: Bilal on July 02, 2013, 01:10:16 AM
Satya, what did you used to mount the motors in the second pic (300mm quad)

Bilal bhai i used the motor mount out of the old lady bug that i had. But they are not good, they dont keep the motors are 90 deg :headbang: its better to go with sketch pen cap or e-cig like VC sir said. I would rather suggest to make mounts using some hard paper. I would try something about this and update

@Arun very nice man, can i add your video on the product page??

I have received new set of motors. Arun's idea of using CF rod i pretty good. Any idea arun where we can get them from? Or shall i get from my China

@SHIV: Yep i am using the same diy kit from satya bhai
The fc board is mounted using double sided tape and battery using velcro(easy to remove and charge)
i will add a lot of pic today.. But the build looks too bad
The wires are not properly hidden(lazy to do all these) 

@satya: Sure you can add 
And cf rod is avail in india itself rcdhamaka, edallhobby, rcbazzar..
No need to disturb your chineese people for that.. 

Ahh nice, then maybe others can buy directly

I think I can able to lift a small key chain cam if I updated to 720 motors right satya?
I tested this with different load..
Till 35gms it was fine.. when increasing the weight it is not lifting up more than a feet.. :p


Sent from my Canvas using tapatalk 2

Use geared motors with 4x2 or 5x3 props for better lift.

Sundaram Sir, I have given that a thought, but making precise gearboxes are a problem, though I have the pinon and main gears from a couple of coaxial helis lying with me.......... Any idea to build one?

Regards
Bilal

If they are all from same model heli then it should work definitely. You can make geared motors from damaged servo gears. Only all four servos have to same model.

Dear all,

Today I got my DIY v939 kit. But can any one guide me how to bind controller board with flysky CT6B tx.

Xtreme, follo the instructions I have PMd you, happy flying

Thanks bilal sir. :

Xtreme,
do post pics of your build here, we'll love to see your creativity

Sure...As soon as possible.

And here are some Pics of my micro quad... A real quick  and dirty build.. 

And more....

Quote from: Bilal on July 03, 2013, 08:19:13 PM
Xtreme, follo the instructions I have PMd you, happy flying

Why not enlighten all of us by posting it

Sundaram sir

How to bind the transmitter with receiver/Bind instructions:

1. Plugin battery to receiver LED will flash quickly and stops
2. Keep it on flat surface and LED will start to flash again at a rapid rate
3. Hold bind button on your TX and switch it ON
4. LED on receiver should start to flash slowly
5. Turn off your TX and leave the bind button and switch ON your TX again.
6. LED on receiver should be solid now, which means its binded successfully

i will modify the first post of the thread with lots of info. I have the modified text will send PM to gusty sir to do the needful

dear arun
what is your motor to motor distance?
is it 4 cf rods that are sticked to base board?

just an update.
my second built was disaster.  hell lot of problems...
not climbing up...allignt problem with motor....
after that drifting to right side always....

need to restart from the scratch.

First post is modified thanks to gusty sir

Shivela boss mine is 100mm motor to motor...
What happens to your second build.. make sure that the fc is fixed parallel.. just use a double sided foam tape throughout and cut a slit for the projected parts...
mine now does flips also will upload the video...

Sent from my Canvas using tapatalk 2

Dear Satya,
Just curios to know what happened to the H-Quad you built on the demo video? Did it fly? Were there any issues flying it? What was the total weight of it?

Thanks,
Sudhakar