Done! Frame reinforced with 2 layers of coro. Perfect take off and hover!

Wonderful!  that was real quick  Video please 

congratulation dada.very beautiful quad u make.really nice.pls upload video too

Here are a few pics of the modified airframe and landing pads. Flex reduced substantially hence flights are more stable. I was too nervous to try to fly and shoot a video at the same time. Need one of Ashta Sir's hat cams. My assistant, Indrakshi Chaudhury, was also absconding today.

She has a very stable hover when I do a hand launch at about 7 feet height. Need to work more on my ground take offs. Hope to upload a convincing video by tomorrow.

My Mother was kind enough to sew me a couple of velcro battery straps. They are awesome. I wonder how I was doing without these for so long. The buckles are made out of bent copper rods 1.5mm.

I have always been very wary about charging a LiPo that is attached to a model with zip ties. In case something goes wrong with the battery, the model itself is doomed.

Please request your assistant to take a vid and let us all admire your quad's stability!

VC sir i am also using C type channels but yours look too thin. My first set of aluminium channels was really weak. They were just 1mm thick. Later i bought another set they have same thickness but they are reinforced with something that can't be bent easily.

Dharmik you are absolutely right, that is why I reinforced them with a double layer of coro. My next Quad will be stronger. Much stronger.

Great build there VC. 

waiting eagerly for the video

Jaago, Sandy Bhai, Jaago! Thanks.

great build VC, undercarriage looks good. yesterday flew my quad in the valley too much winds and my 3D settings couldn't handle that well

Video please! and whats the AUW VC? mine came around 760g with a 2.2 3cell.

VC sir, source of aluminium square channels is here, price is great like local stores.
http://www.aeroworks.co.in/frames.html