Can anyone tell me the correct gain setting for kk2.1 lcd with v1.9 stevis fw

with default setting its osscilate vry mch.. and hard to control

Motors used :- 2212/13 1000 kv
ESC :- Simonk 30A
props: 10x 4.5

Any specific reason to flash this firmware? I would suggest you to try 1.6++ rev3 firmware from lazyzero flash tool.

@Dharmik
the fW1.9 is the default firmware with the board. and i don't hav usbasp. so cant change. can u tell me the gain settings of the fw 1.6. i will try to fly with thz settings.

Hi
P gain 100
I gain 100