Hi Friends here is my new BiCopter / V copter Build with self designed 3D Printed frame
FC: Pixhawk 2.4
Firmware: Arducopter 4.0.5
Motors: DJI 2008 1400Kv
Prop: DJI 8331 LN
ESC: 4S 30A with SimonK firmware
Servo : DS410
Battery : LiHv 3S 1480mAh
Receiver: Frsky R-XSR
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743699)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743701)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743703)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743705)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743707)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743709)
(http://www.rcindia.org/multirotors/bicopter-scratch-built/?action=dlattach;attach=743711)
Here is the full build video (in my regional language )
https://youtu.be/-IzFMRuzrEY (https://youtu.be/-IzFMRuzrEY)
All Designed 3D STL Files are pulished here https://www.thingiverse.com/thing:4641165
And I thought this section of forum lost its old spark since the DJI's came !
Welcome back ya'll...
That's a great design and build! :hatsoff:
You can consider a different (lighter and more compact) FC than the pixhawk.
Hi,
I have seen your video in youtube could you please help me out to make my bicopter airborne.
please refer this link http://www.rcindia.org/multirotors/pixhawk-bicopter/ im facing issue....its start spinning while giving thottle.
Thanks.
hi, buddy,
If lihv is available separtely, i want it
9599382710
Quote from: hangingtough on May 17, 2021, 04:01:05 PM
hi, buddy,
If lihv is available separtely, i want it
9599382710
Have only three of them and I'm using that, most of the sellers are not active now, will check and let you know if available.