Hi Friends here is my new BiCopter / V copter Build with self designed 3D Printed frame

FC: Pixhawk 2.4
Firmware: Arducopter 4.0.5
Motors: DJI 2008 1400Kv
Prop: DJI 8331 LN
ESC: 4S 30A with SimonK firmware
Servo : DS410
Battery : LiHv 3S 1480mAh
Receiver: Frsky R-XSR

Here is the full build video (in my regional language )

All Designed 3D STL Files are pulished here https://www.thingiverse.com/thing:4641165

And I thought this section of forum lost its old spark since the DJI's came !

Welcome back ya'll...

That's a great design and build! 

You can consider a different (lighter and more compact) FC than the pixhawk.

Hi,

     I have seen your video in youtube could you please help me out to make my bicopter airborne.

please refer this link http://www.rcindia.org/multirotors/pixhawk-bicopter/  im facing issue....its start spinning while giving thottle.


Thanks.

hi, buddy,

If lihv is available separtely, i want it

9599382710

 

Quote from: hangingtough on May 17, 2021, 04:01:05 PM
hi, buddy,

If lihv is available separtely, i want it

9599382710

Have only three of them and I'm using that, most of the sellers are not active now, will check and let you know if available.