Hi guys , I have put a camera on my old f450 , to reduce the vibration , I have balanced the prop , put some foam underneath the camera , but still the image is horrible at 720p , because it vibrates so much , any tips ?

How are you attaching the camera?

Like this :

Try to mount the cam with just Velcro. Don't tie it with rubber band. I used the rubber band and was getting vibs, with the cam just sitting on velcro eliminated vibrations. Try it.

I'll try it , thanks

stick the velcrow by using tape or any liquid
look at my pic i did the same for my f450 frame

May these images can help you. They are generally for flight controller mounting. But I hope you can use them as you camera mount.
You can do it yourself. First buy some vibration damping balls.

I am new in this hobby. Many experienced people are here. They ll help you a lot.

You can try the landing gear

I have anti vibration mount for sale which will help u
Let me know if interested

The foam that you are using seems very hard. Try to use a lesser dense foam. Or you can use some rubbers, like bat grip. You would have some vibrations but you can start by reducing some.

It's fine now , no need for replacement foam , but thanks for replying

what was the solution devang???

All I did was that I removed the rubber bands

Balance your props and get bAlanced motors, buy a anti vibration damper from RcMumbai.com or rcproduct.in I think quadkopter.com also has it check it out

Why can't you get it , it's fine now

Your welcome.