BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE}

Shreyas_K · April 06, 2019, 09:41:30 PM

Hey Guys,

This is the Build Log for the 3D printed Mavic Pro Clone, i.e., v4.1 - F3 , that I'm currently working on...

Will try to post as many updates n pics as possible... Also, would like to take help from you guys, as I'm new to inav...

I'm also working on a Mini Mavic (scaled down brushed version of the Mavic pro)... Will create a separate build-log for the same soon...

**All credits and thanks to CDRskull - diyrc.co.uk for this amazing design**

Shreyas_K · April 06, 2019, 10:54:47 PM

Parts I've gone with as of now :
1. SP Racing F3 Deluxe with integrated OSD
2. Spedix IS30 4-in-1 30A 2S-4S ESC
3. Cobra 2206 2100kv Motors
4. NZ mini GPS
5. FrSky D4R-II Receiver
6. HC-SR04 for Sonar

Shreyas_K · April 11, 2019, 07:19:15 PM

ESC and Sonar attached...

Sent from my ASUS_Z01RD using Tapatalk

Shreyas_K · April 12, 2019, 04:21:41 PM

First power up

Sent from my ASUS_Z01RD using Tapatalk

madaquif · April 15, 2019, 08:38:53 PM

looks neat @ Shreyas

...... any flight videos??

Shreyas_K · April 15, 2019, 08:56:33 PM

Thank you Sir

Broke the current Ultrasonic Sensor while desoldering the headers... Realized it quite late

All part of learning

So had to remove quite a few parts...have ordered for a better one...waiting for it to arrive

Shreyas_K · April 16, 2019, 10:00:46 AM

Even though my QX7 is very close to the RX (D4R-II) , the RSSI is very Low (it displays in the TX)... Any idea as to why this might be happening ?? ( It was fine during the previous power up).

Thank you in advance for any help.

Shreyas_K · April 19, 2019, 08:17:40 PM

Quote from: Shreyas_K on April 06, 2019, 10:54:47 PM
Parts I've gone with as of now :
1. SP Racing F3 Deluxe with integrated OSD
2. Spedix IS30 4-in-1 30A 2S-4S ESC
3. Cobra 2206 2100kv Motors
4. NZ mini GPS
5. FrSky D4R-II Receiver
6. HC-SR04 for Sonar

The HC-SR04 was changed to US-100

Sent from my ASUS_Z01RD using Tapatalk

Shreyas_K · April 20, 2019, 12:20:31 PM

Check out the first flight video

:

New to racequad FC flight modes

; will upload a better video once I get a hang of it..

Sent from my ASUS_Z01RD using Tapatalk

sim_tcr · April 20, 2019, 02:01:58 PM

What firmware?
What is the sonar module used for?

Shreyas_K · April 20, 2019, 02:12:37 PM

Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?

Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)

sim_tcr · April 20, 2019, 02:25:46 PM

Quote from: Shreyas_K on April 20, 2019, 02:12:37 PM
Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?
Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)

Without baro?
How is it performing?
How is other nav functions performing.

I too have a inav 5 inch quad with gps. Build log there too.

Shreyas_K · April 20, 2019, 02:28:31 PM

Quote from: sim_tcr on April 20, 2019, 02:25:46 PM
Quote from: Shreyas_K on April 20, 2019, 02:12:37 PM
Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?
Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)
Without baro?
How is it performing?
How is other nav functions performing.

I too have a inav 5 inch quad with gps. Build log there too.

There is Baro

I'm using a SP Racing F3 Deluxe board with integrated OSD (This one - https://robu.in/product/sp-racing-f3-flight-controller-integrate-osd-deluxe/ )