BUILD LOG :: Mavic v4.1 - F3 (3D Printed) {CLONE}

Started by Shreyas_K, April 06, 2019, 09:41:30 PM

Previous topic - Next topic

0 Members and 4 Guests are viewing this topic.

Shreyas_K

Hey Guys,

This is the Build Log for the 3D printed Mavic Pro Clone, i.e., v4.1 - F3 , that I'm currently working on...

Will try to post as many updates n pics as possible... Also, would like to take help from you guys, as I'm new to inav...

I'm also working on a Mini Mavic (scaled down brushed version of the Mavic pro)... Will create a separate build-log for the same soon...

**All credits and thanks to CDRskull - diyrc.co.uk for this amazing design**
SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

Parts I've gone with as of now :
1.  SP Racing F3 Deluxe with integrated OSD
2.  Spedix IS30 4-in-1 30A 2S-4S ESC
3.  Cobra 2206 2100kv Motors
4.  NZ mini GPS
5.  FrSky D4R-II Receiver
6.  HC-SR04 for Sonar

SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

ESC and Sonar attached...

Sent from my ASUS_Z01RD using Tapatalk
SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

First power up

Sent from my ASUS_Z01RD using Tapatalk
SKY IS NEVER THE LIMIT !!

--ElectroBox--

madaquif

looks neat @ Shreyas      :thumbsup: :thumbsup: ...... any flight videos??
Regards

MadAquif...

4 D RC ....SURFACE WATER AIR N SPACE

Shreyas_K

Thank you Sir :)

Broke the current Ultrasonic Sensor while desoldering the headers... Realized it quite late :banghead:
All part of learning ;)

So had to remove quite a few parts...have ordered for a better one...waiting for it to arrive  8-)
SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

Even though my QX7 is very close to the RX (D4R-II) , the RSSI is very Low (it displays in the TX)... Any idea as to why this might be happening ?? ( It was fine during the previous power up).

Thank you in advance for any help.
SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

Quote from: Shreyas_K on April 06, 2019, 10:54:47 PM
Parts I've gone with as of now :
1.  SP Racing F3 Deluxe with integrated OSD
2.  Spedix IS30 4-in-1 30A 2S-4S ESC
3.  Cobra 2206 2100kv Motors
4.  NZ mini GPS
5.  FrSky D4R-II Receiver
6.  HC-SR04 for Sonar
The HC-SR04 was changed to US-100

Sent from my ASUS_Z01RD using Tapatalk
SKY IS NEVER THE LIMIT !!

--ElectroBox--

Shreyas_K

Check out the first flight video :) :



New to racequad FC flight modes ;) ; will upload a better video once I get a hang of it.. :)

Sent from my ASUS_Z01RD using Tapatalk
SKY IS NEVER THE LIMIT !!

--ElectroBox--

sim_tcr

What firmware?
What is the sonar module used for?

Shreyas_K

Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?
Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)
SKY IS NEVER THE LIMIT !!

--ElectroBox--

sim_tcr

Quote from: Shreyas_K on April 20, 2019, 02:12:37 PM
Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?
Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)
Without baro?
How is it performing?
How is other nav functions performing.

I too have a inav 5 inch quad with gps. Build log there too.

Shreyas_K

Quote from: sim_tcr on April 20, 2019, 02:25:46 PM
Quote from: Shreyas_K on April 20, 2019, 02:12:37 PM
Quote from: sim_tcr on April 20, 2019, 02:01:58 PM
What firmware?
What is the sonar module used for?
Firmware : iNAV

Sonar module is used for low altitude hovering (altitude hold)
Without baro?
How is it performing?
How is other nav functions performing.

I too have a inav 5 inch quad with gps. Build log there too.

There is Baro

I'm using a SP Racing F3 Deluxe board with integrated OSD (This one - https://robu.in/product/sp-racing-f3-flight-controller-integrate-osd-deluxe/ )
SKY IS NEVER THE LIMIT !!

--ElectroBox--