Q680 V3 Quad-Copter Build...................................

Started by zalman15320011351, March 23, 2016, 10:38:29 AM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

zalman15320011351

Hi Everyone,
I am starting this thread to inform all of you guys about my Quadcopter Build.
I will be shortly posting pics.
Any help is appreciated.I need all of you guy's help to finish my build.

QUADCOPTER CONFIGURATION
Q680 V3 Glass Fiber Quadcopter Frame 680mm - Integrated PCB Version
Hobbyking KK2.1.5 Multi-rotor LCD Flight Control Board With 6050MPU And Atmel 644PA
Turnigy MultiStar  2216-800KV 14-Pole Outrunner Motor
Afro 20A ESC
FlySky FS-TH9X-B 9CH Transmitter and 8CH Receiver with 2.4ghz Module
Lightweight FPV Multifunction 200mm High Landing Gear Set for Multi-Rotors (Red/Black)
Turnigy 2200mAh 3S 20C Lipo Pack

madaquif

my 2 cents.

try going for a bigger battery...

atleast 3300mah or above.
Regards

MadAquif...

4 D RC ....SURFACE WATER AIR N SPACE

jovino

Are u serious????     So less      mah .......and which props will be using ??
And u a Gps fc ......

zalman15320011351

Hi Everyone,
It's right.I bought a big frame and a small battery.I was not aware of these things.
Only after the battery reached me,I came to know about it.
Now I am looking for a 4000-5000 mah 3S Lipo in India.

Tanmay.mathur

Regards,
Tanmay mathur

a3ruz

Adding a parallel battery is also a option as Tanmay said but , but the discharging rate of cells will be different ! I there is no other way go for parallel connection or else get a battery
It's all about beging in air
CT6B | HK Bixler | APM | S550 | Tarot XYZ M | Turnigy 9x | Naza M V2 | Phantom 2 | Phantom 4 | Taranis X9D+ | F450 | ZMR250 | Naze | Omnibus | Martian II | Airypix | Airytek | Drone Racers Kerala

Himadri Roy

For once you have tasted flight you will walk the earth with eyes skywards for there you have been and there you will long to return
- Leonardo Da Vinci

https://www.youtube.com/himadrifpv

zalman15320011351

Well.........adding one more Lipo in Parallel  is not a problem I think.As the information I got.
Thanks.

Balakrishna Reddy

Quote from: zalman15320011351 on March 24, 2016, 03:33:13 PM
Well.........adding one more Lipo in Parallel  is not a problem I think.As the information I got.
Thanks.
Yeah thats a good idea but it may become difficult to place it on your quadcopter and sometimes may slightly heavier with such kind of battery rest is the same.

Tanmay.mathur

Regards,
Tanmay mathur

zalman15320011351

I have teo lipos.
1 ) Turnigy  2200mah  3S 20C Lipo
2 ) B-Grade 2200mah  3S 35C Lipo

Tanmay.mathur

Regards,
Tanmay mathur

zalman15320011351

Ok got it Tanmay.
Is there any other way.Or any battery that would fit my Quad's configuration

zalman15320011351


Tanmay.mathur

Regards,
Tanmay mathur

shobhit17

Dear friend..... well all Lipos appear to be same.... but from my experience....
I have used both these brands..... and I have always found that Turnigy batteries outlived the Zippy ones each and every time..... The Zippy tend to bloat up after 6-7 months.... whereas I been using the turnigy for over 2 years now... and its still too good to be true.
Well I been into aeromodelling since I was in School....  and then been in the air for over 30 years.  Now looking to be back into aeromodelling full time...