Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: SORAV on July 01, 2015, 04:47:01 PM

Title: Crius Neo 6 v3 GPS not working properly with Multi wii.
Post by: SORAV on July 01, 2015, 04:47:01 PM
Dear All,

I  am facing some strange issues while setting up a multi wii quad and the major issue is with the Gps settings.

Setup used :-

I am using  crius aio pro v2 Fc with crius neo 6 gps on multi wii 2.4.

450 quad size with hobby king f30a esc flashed to Blheli 13.1v & emax 980 kv motors with 9*4 inch props.

Issue:-

1. Currently the Gps is at 9600 baud rate with 1hz refresh rate.
2. I  am able to get  gps fix which I checked onto the multi-wii configurator, but when I practically fly my quad it doesn't hold the gps position nor it reacts to GPS RTH command,it just descends.

Requesting all of you to help me in this regard.

Regards,
Sorav
Title: Re: Crius Neo 6 v3 GPS not working properly with Multi wii.
Post by: akshay550 on July 01, 2015, 07:02:33 PM
maybe intereference issues or gps antenna may be bad.
Title: Re: Crius Neo 6 v3 GPS not working properly with Multi wii.
Post by: SORAV on July 01, 2015, 07:30:29 PM
I think gps interferance can lead to a little deviation but it will work and as far as the antenna is concerned its having a ceramic one and the same is directly soldered to board.
Title: Re: Crius Neo 6 v3 GPS not working properly with Multi wii.
Post by: akshay550 on July 01, 2015, 07:31:33 PM
i had antenna issues only solved by replacing it
Text only | Text with Images