Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: parichya.gautam on December 25, 2014, 04:16:34 AM

Title: Custom Mobile holder
Post by: parichya.gautam on December 25, 2014, 04:16:34 AM
Wanted to get some aerial footage and didn't have any smaller cams nearby. So thought why not :D

Total weight of the quad ( all inclusive ) is 1200gm

And as usual, used the Mechanix kit i earlier used to create the RC TiltRotor Car and the Landing Skids :)
Title: Re: Custom Mobile holder
Post by: madaquif on December 25, 2014, 04:38:26 AM
my 2 cents ...again ...add some soft foam to reduce vibrations.....

is the all up weight with the phone on the quad and battery ?...??
Title: Re: Custom Mobile holder
Post by: parichya.gautam on December 25, 2014, 04:43:16 AM
ok, will do that. yes. all inclusive
Title: Re: Custom Mobile holder
Post by: utkarshg13 on December 25, 2014, 05:52:26 PM
Cool!!
I too did this but on my plane. Do take sufficient measures to reduce vibrations as much as possible. Also, does your phone has DIS(Digital Image Stabilization) because otherwise the image would be bad.
Title: Re: Custom Mobile holder
Post by: parichya.gautam on December 25, 2014, 06:37:03 PM
yea, will sponge it a bit , recorded a vid, and the vibration could be heard, BUT if muted, the video was perfect :D
Title: Re: Custom Mobile holder
Post by: chintal on December 25, 2014, 06:40:38 PM
Dont use a costly phone
You will regret it
U never know when it can crash
Title: Re: Custom Mobile holder
Post by: utkarshg13 on December 25, 2014, 07:49:51 PM
I agree with chintal.
Make sure your quad flies stable otherwise you may cry.
Title: Re: Custom Mobile holder
Post by: parichya.gautam on December 25, 2014, 07:53:09 PM
i don't plan to fly very high
Title: Re: Custom Mobile holder
Post by: parichya.gautam on December 25, 2014, 10:24:41 PM
Updated it.

No more vibration or jaggy feel. Plus its perfectly still now. And it stays even upside down :D
Text only | Text with Images