RC India

RC Models => Multirotors => Topic started by: kiran rc on January 02, 2015, 03:24:49 PM

Title: DIY quadcopter
Post by: kiran rc on January 02, 2015, 03:24:49 PM
Hi everyone! ;Dhere is my new 450 quad.It is pretty stable and flies well. :)
Specification
AUW-1200grams
Aluminium frame
KK2.1.5 fc
2200mah lipo

You can watch the video here
https://www.youtube.com/watch?v=wvpTJO6Rle4&feature=youtu.be (https://www.youtube.com/watch?v=wvpTJO6Rle4&feature=youtu.be)
Title: Re: DIY quadcopter
Post by: rcrcnitesh on January 02, 2015, 04:29:51 PM
wow awesome.

what are the landing gears made off.
Title: Re: DIY quadcopter
Post by: ved on January 02, 2015, 05:18:18 PM
What motors are those?
Title: Re: DIY quadcopter
Post by: gunnu on January 02, 2015, 05:20:30 PM
Quote from: ved on January 02, 2015, 05:18:18 PM
What motors are those?
i think sunnysky angel 2212
Title: Re: DIY quadcopter
Post by: sooraj.palakkad on January 02, 2015, 06:10:18 PM
Awesome Landing gear is this Al . too ???
Title: Re: DIY quadcopter
Post by: kiran rc on January 02, 2015, 08:56:02 PM
Yes motors are sunnysky A2212.
And gear is made from aluminum.
Title: Re: DIY quadcopter
Post by: sooraj.palakkad on January 02, 2015, 09:31:53 PM
Landing gear is Aluminum ???

Need a full description there :)  , What is those bends ? and how did you put it together ?
Title: Re: DIY quadcopter
Post by: kiran rc on January 03, 2015, 06:12:21 AM
It is aluminum strip.drilled holes and attached with screws.
Title: Re: DIY quadcopter
Post by: sooraj.palakkad on January 03, 2015, 08:18:08 AM
Kiran, If you have time post a detailed build log with pictures, it would be helpful for others.
Title: Re: DIY quadcopter
Post by: kiran rc on January 03, 2015, 09:25:59 AM
Will try.I did this in my holidays. ;)
Title: Re: DIY quadcopter
Post by: K K Iyer on January 03, 2015, 09:35:21 AM
@kiran rc
Well done!  {:)}
Title: Re: DIY quadcopter
Post by: rcparkjets on January 03, 2015, 10:38:02 AM
@kiran rc
Good job.
Title: Re: DIY quadcopter
Post by: kiran rc on January 03, 2015, 12:55:31 PM
Thanks, everyone :hatsoff: