I've bought a flamewheel 450 with dji m lite and paid a fortune for it, and now I'm not able to use it with my transmitter, dji dji dji all my mind
hi.
pls call vineet sharma on 9911363711
he will help
regds
vineet is a friend of mine,, have contacted him previously and he is still in doubt that whether my transmitter, avionic rcb6i can be used with it
what problem is coming?
i believe i did the claiberation, how to arm the thing? after self check it goes on blinking fast red
check what mode you are on, A, or failsafe or what. Red blinking also means battery is low below the point set in the alarm.
nope...its fully charged...11.7 says cell checker
come to skype rahul,, we'll fix it :)
11.7 doesn't mean dat your batt is charged
When its full it will show 12.6v
Quote from: roby on March 29, 2014, 08:22:14 PM
I've bought a flamewheel 450 with dji m lite and paid a fortune for it, and now I'm not able to use it with my transmitter, dji dji dji all my mind
Roby
A flashing red light is a very simple problem caused by Tx. Don't worry.
Please get all your trims/sub-trims/ATV to neutral. Or simply reset your tx to factory setting. You are done.
If you still have problem,
Call us after connecting your quad to computer. It would take 2-3 minutes.
All the best & happy landings.
Sphere Hobbies
Dealer for DJI
+91-99251-20630
Roby its because the x3 port of the naza is not getting correvt input..
Check the conmection..
Still not wprking then go to naza softwate and in that voltage setting shutdown the low voltage settings...
It will solve the problem.. but use a low voltage alarm instead...
Cal me if still it occurs..
9895477017
All the best
sry all,, thats a naza v1...
Changed topic name to give some indication of what the thread is about.
thanks {:)}
i'm not able to arm it :(
Thanks sphere hobbies for instant help..
Quote from: roby on March 30, 2014, 02:39:52 PM
thanks {:)}
Please be mindful while creating topics in the future. "Help me" is not really a topic name !
Having a proper topic name helps others searching for information in future. And not just on RC India, but across the world due to search engine indexing.
Apologies... After my problem gets fixed.. I'll brief it so as to help dji beginners
how to arm it? what does rapid yellow blinking after completing selfcheck means? i believe i calibrated it successfully, does it means that its in attitude mode?? y then after csc is it not arming?
Have you look at the manual first ?
Typically that means it is in "failsafe" mode, which it should not be. This is the result if you did not program your flight modes (manual, att, gps-att or failsafe) correctly in your TX (using end-points/ATV or other suitable methods).
a very new way to arm dji naza v1,which was not given in manual.. just put both the left control at right bottom and right stick at left bottom, and after 5 secs,put throttle>50%.. when i did that with the traditional 4 way method it din't work,, this upgrade was not in manual...
thanks Mr. Anam from rc addict... you deserve a special rc gift :)
Though i was not his customer, he helped me like anything...a very kind gesture indeed..
looking forward to shop from you in the near future ;)
Good to know. It would be good to post documentation links to this here, to help anything searching later on.
So how did you get out of the blinking yellow lights ? Or did you mean to say you successfully armed it while the yellow lights were rapidly blinking ?
that yellow light signified the attitude mode :)
we can fly it till it goes red blinking which toggles voltage error..
the naza v1 manual shows four different pictures to arm the quad, which have to be performed in that sequence, but the method described above works well with 99.9% case (what he said)..
As my transmitter was calibrated successfully and gain and other features were precise,
there could be a possible shift from the traditional arming method which i tried several times with no positive results.
I loved the stability of the alttitude mode when i entered low gain values as suggested by him. Will shift in to gps soon.. videos to be followed... amazing flight performance, only rc thing born not to die
some pics of my quad :)
also i can't use it with gps because end point correction cannot be done with avionic rcb6i... any suggestions?
i've heard that someone uses it with gps,, Mr. Vivek Bali said... and he did some electronic manipulation in his trans.. is it possible?
If you are using Naza Lite V1, most of what you are saying does not make sense.
[1] For example, arming it requires ANY ONE of 4 possible stick movements, not 4 things that have to be performed in sequence. See page bottom of page 15 and top of page 16 ("Step 2: Cut Off Type") in the manual below :
http://download.dji-innovations.com/downloads/naza-m%20lite/en/NAZA-M%20LITE_User_Manual_v1.00_en.pdf (http://download.dji-innovations.com/downloads/naza-m%20lite/en/NAZA-M%20LITE_User_Manual_v1.00_en.pdf)
[2] Another one... you said :
Quote from: roby on March 30, 2014, 04:42:08 PM
how to arm it? what does rapid yellow blinking after completing selfcheck means? i believe i calibrated it successfully, does it means that its in attitude mode??
Regarding Yellow blinking rapidly, see page 18 then number "4" under notices. It says
QuoteCheck the LED indicator. Read the appendix in this manual for details. LED will give fast yellow blinking if in fail-safe mode.
I am beginning to wonder if you missed the manual completely and were basing your work on some wrong documentation.
Just didn't want to confuse others reading this thread !
Oh yeah.. It might be in the failsafe mode.., but 4 blinking yellow mean altitude mode... Which was what I meant the second time...And YouTube video reveals that that procedure has to be performed In a sequence... Check the first video on v1 calibration...
And that procedure did not work.. Also the 50% throttle thing was missed in manual.. Not to blame any documentation but my weak communicating skills, well thanks for correcting me
I hope it is clear to you on how to communicate issues on a forum like this. "4 blinking yellow (with some pause after that)" is totally different from "rapid yellow blinking".
And which You tube video ? Always refer to the manual first. Never head of doing "4 sets of stick movements in sequence" for arming a Naza !
Yes sir, still got lots to learn from u...
http://www.youtube.com/watch?v=-2cl0S4diY8# (http://www.youtube.com/watch?v=-2cl0S4diY8#)
Quote from: roby on March 30, 2014, 11:21:59 PM
And YouTube video reveals that that procedure has to be performed In a sequence... Check the first video on v1 calibration...
The video never mentions doing this in any sequence. He only says he could not get any of the 4 positions to work successfully.
Guess closer attention to detail is needed.
sorry :) the problem now is with end points correction which is not mentioned in the manual..
ping plz
http://www.youtube.com/watch?v=4dpCyEz4W0w#ws (http://www.youtube.com/watch?v=4dpCyEz4W0w#ws)
alttitude mode is good.. wanna fly in gps mode :( why futaba's so costly :(
[Admin Note] Fixed Youtube URL. Changed "y" to "why".