Hellow Rc India members.
This is my first mini Quad build for RC Mumbai Game changer competition.
I'm not a professional but I did my best.
I like to use scratch for my built and here I did the same.
I used MDF cardboard for base and top frame plate.
And aluminium pipe for motor arms.
Alluminium landing gear.
And this is my fastest built.

Frame plates of MDF.

Motors mounted on arms.
I had to cut half arms for mounting these motors.
Soldered ESC.
Found these aluminium pipe best for landing gear so cut out 10cm pieces and molded them.

I'm going to use cc3d flight controller and a Avionic 7ch tx rx.
1250mah lipo to power this little quad.

arms installed on base plate and esc connected.
I found these red and green LED in my shelf for better orientation.

Covered esc by one more MDF plate and used elastic for battery holding.
Landing gear installed and balanced them.
Now it is looking so cute

Prop installed and completed build.
It was a quick build within 1hr.

I woul like to thanks to those people who supported my this build-
Rcmumbai for providing 12A ESC(i received esc next day to order)
Rc India member Mr. Aravind Jayaraman for providing Motors at very cheap price.
Rc india member and my close friend Mr. Dilip soni for informing me about Game changer competition.
Rc India member Mr. Sanjiv for providing me prop at effective price.(he shipped before receiving payment)

So my total cost of this build is as follows-
Motors               1600/-
Esc                    2000/-
cc3d                  1500/-
prop                   200/-
battery              750/-
Total                6050/-/-
Frame is totally from scratch   

Night look

400/motor? where did you buy them from?

Forum member

I'm waiting for the video with the night look! Awesome lighting! 

You are welcome Antriksh !

Waiting for the night flying video !