Hi
Nearly,I have completed a tricopter with KK2.0 board. Now, i am facing a problem in tail motor. Its get ON (starts to rotate) after 50% of throttle given only. I am new to multicopters. Kindly help me out to make my model to fly.
:hatsoff:
so the problem is it should start at from 0% throttle?
You should calibrate the esc first to set the throttle range..
Sent from my Canvas using tapatalk 2
^ @arun sir, it didnt work for me, i calibrated it 10 times!!
What now? plush's are of no use for multirotors
It didn't work means? What is the problem right now?
The motors is not starting at the same time?
Sent from my Canvas using tapatalk 2
for me the motors dont start from 0% throttle, they start at about 50%.
maybe its a firmware issue with your esc.
this was my problem. but it worked out for me after flashing them with simonK.
https://www.youtube.com/watch?v=dsSjYrGkvMU
okay thanks
but i think flashing plush 25A to simonk is difficult
hmm hard luck!
i chose ecs(s), whom i could upgrade in the future and that planning saved my ass.
hmm :| sad
Awesome, my problem finally solved.
I re-calibrated the transmitter and it solved the problem. :)
great!
happy flying.
thanks its not yet ready to fly :)