Flashing or upgrading firmware of HK board

[satyagupta]

Hey Guys,

Where do we get software for flashing or programming the multicopter board. I have HK board v2.1. I installed driver but looking for firmwares and software  to upload the firmware. I am googling too but any help from guys who have done this will help a lot. 

Thanks

[satyagupta]

opps i got it from forum itself
my bad.

http://www.rcindia.org/self-designed-diy-and-college-projects/kkmulticopter-flash-tool-v0-60-beta-4/

[rohitgupta322]

Complete information here : http://www.rcexplorer.se/Educational/HKKK/HKKK.html

[Dharmik]

Hey bro you will need USBASP cable. And make sure you disconnect everything from board. Board will get 5V power from usb port.

[satyagupta]

Dharmik bro, i have that AVR programmer, USB thing.. I guess thats the one you are talking about right??

[Dharmik]

Yes that one 10 pin to 6 pin converter comes with it.

[satyagupta]

ditto thats what i have

[spitfire]

Checkout 'Files' tab in link below. There are various guides available using Kkmulticopter flash tool as well as AVR Studio.
http://www.hobbyking.com/hobbyking/store/__21321__USBasp_AVR_Programming_Device_for_ATMEL_proccessors.html

[spitfire]

In case you are using KKmulticopter flash tool the follow link below for video tutorial
http://lazyzero.de/en/modellbau/kkmulticopterflashtool

In case you need troubleshooting then here is manual
http://lazyzero.de/en/modellbau/kkmulticopterflashtool/manual