Hi
I have designed and made this Hexa for some innovative purpose..
It can be used for dropping flowers, candies or confetti..
The configuration is as follows..
Naza M lite( V2 upgraded)
Tiger Motor 2212/980KV
8045 CF props
Afro ESC 30A
TxRx offcourse
5500 Tattu 4S Lipo
Led kit ( From rcmumbai.com)
Whole frame is made up of CF 2mm sheet and 12mm square alluminium pipe.
It weighs just 2360gm Including BATTERY...400gms of thrust per motor is not a big deal.. with this configuration.
I have used a rotary cutter to make the frame as per the design made on CorelDRAW.
(TIP- Use sponge sheet below while cutting it's very helpful and safe)
Now the main thing the BOX...
I have used high Torque digital servo , sun board sheets, fibre tape and CF strips joined together with aluminium ribits.
Hope this is something different from the lead..
H or I sized hexa very nice :)
Awesome...;)
thanks sir...
forgot to mention that the Motors And CF sheet was provided by YOU...