I'm new to rc and making my first quadcopter.
I'm using the following parts:
Q450 mm sized frame.
Motor:Emax 2216-810 kv motors with 1045 props
Battery:5000mah 3s 20-30c turnigy battery pack
ESC:Turnigy plush 30a esc
FC:apm 2.6 with ublox gps
Radio:FS-T6
Total weight:1.3kg
PLease go through the list and tell me if the battery is right for the motor(especially the 'c' rating and no. of cell)
Waiting for your replies.....:).
In the case of motor,get extra spares of the motor shafts cause it might get eroded and at-last you have to get T-Style Props which is hard to get within a short time.
yes the lipo is f9 and should give you a flight time of around 15min or more depends on payload u put :hatsoff:
What is "f9"?? :help: :help:
ohh sorry for the short code f9=fine :) well the lipo should work properly :hatsoff:
Moved to Multirotor board.
Updated topic name to be meaningful. Always wonder what people save by saying "Help me sort out" only. Why keep it vague so that no one knows what the topic is about from the topic name alone !
Thank you anwar :)
For your 800Kv motor, 4S battery with 1030 or 9450 prop will yield better results. Battery capacity recommended: 3500 to 4500mAh .
Also instead of turning plush escs , go for simonk escs .
Sent from my LenovoA3300-GV using Tapatalk