people i want to make tricopter under 9000 but its going upto 10000
How did you arrive at that estimate? If you post the components you are looking at, we can suggest cheaper alternatives, or even if some of them are unnecessary.
KKmulticopter V5.5 Controller BlackBoard W/USB Programmer
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=1_103_109&products_id=1047
:Rs:1412
EMAX CF2822
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=100_93&products_id=391
:Rs:465each :Rs:1395 3x
hobbyking 20-18a esc
:Rs:520 :Rs:1560x3
EMAX ES08MA Metal Gear Servo
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=89_111&products_id=936
:Rs:343
240V 2-3 CELL LI-PO BATTERY CHARGER
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=102_96&products_id=156
IND-POWER 2200mAh-3Cell 11.1V 20C LiPo
http://www.rcdhamaka.com/index.php?main_page=product_info&cPath=102_94&products_id=792
:Rs:916
FS-CT6B 6ch 2.4GHz transmitter & receiver
http://www.rcbazaar.com/products/396-fs-ct6b-6ch-24ghz-transmitter-receiver.aspx
:Rs:1950
props ccw and cw :Rs:122each
prop adapters :Rs:35 each
Do you really need a metal gear servo?
Also, don't look at the battery, charger, and Tx / Rx as "costs" of the tricopter, because you can use them on other helis or planes as well.
Even so, from this list your total is 8500 including the above mentioned components.
but if i say its my first and last project
come on i am just 12 years old need someone to guide
Get the Radio from Rcbazaar 1950
And all other elecs from HK
motor 380*3
http://www.hobbyking.com/hobbyking/store/__21974__Turnigy_DST_1200_Brushless_Bell_Motor_1200kv.html
esc 380*3
http://www.hobbyking.com/hobbyking/store/__25112__HobbyKing_Red_Brick_20A_ESC.html
Servo 200
http://www.hobbyking.com/hobbyking/store/__11855__HobbyKing_928BB_Servo_2_0kg_9g_0_13sec.html
flight controller+ programmer 1000
http://www.hobbyking.com/hobbyking/store/__19534__HobbyKing_Multi_Rotor_Control_Board_V2_1_Atmega168PA_.html
http://www.hobbyking.com/hobbyking/store/__21321__USBasp_AVR_Programming_Device_for_ATMEL_proccessors.html
lipo
2200mah rs550
shipping max 1000
total say 6000+ 500(extra for connectors and extras)
All the best
Of course need to make your own frame... 500 for that... also ;D ;D
Hobbyking tip: Stay on one prodct page for a long time, it'll come up with a popup which offers a discount. It isn't much, usually 2-5 usd, but it adds up.
Another tip: ship using airmail and in small batches. Its cheaper that way, and less customs problems
thankyou :)
I will recommend you to ship the lipos separately and which will take time to reach you.. also i just give you an estimate.. Use techniques like pranav suggested to get more discounts... :thumbsup: :thumbsup:
Use buddy code if it is avail..
Go through the forum and get many tips about shipping from HK..
All the best for your build..
Dont forget to Upload the buil log.. {:)} {:)}
you order from which warehouse?
International. That is the Hong Kong warehouse.
WHAT IF I TAKE FC 2822 INSTED OF Turnigy DST-1200 Brushless Bell Motor 1200kv
Emax 2822 weigh less... aerodrive 1200kv weighs 20gm more but powerfull than 2822 in my view..
I have 2 of that.. very powerfull.. :thumbsup:
Final decision is always your's... :)
what if i use towerpro motors? :headscratch:
http://www.hobbyking.com/hobbyking/store/__664__TowerPro_Brushless_Outrunner_2410_08T_890kv.html