Main Menu

how to make quadrotor?????

Started by avdhruva, August 03, 2010, 09:41:58 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

v2 eagle

Sorry Anwar,
I tried my best to explain Viki about how the controller board works.  :banghead:

Thanks
AK.
FPV with head goggles

http://ashokpkumar.wix.com/mysite

vikirobot

#26
thanks for the reply

what about the links to the motor i posted?

if i buy above said flight controller or any other controller should i have to program it or it comes pre programmed?

rcrcnitesh

you can get this quadcopter set http://www.quadkopters.com/product/diy-v939-quadcopter-kit/
this one comes with a flight controller board also so enjoy your quad you would just require a tx,rx set
Maker | Aeromodeller | Teenager

Dk

hello bro im also from jaipur ....and i can help you.. :)
you can contact me at 9929319697
thnx :salute:

Avadhut10001

How to choose Motor and Propeller for Quadcopter.. high thrust,high carry weight, 20-30amp ESC , low cost  :Rs:?


pls help  :headscratch:
Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

Shyam Hembram

A low kv motor is good for a quad, like about 1000kv or below, prop size in the range of 9"-11"inch which depends upon your battery setup and costs  above 10k for a good setup if you already have a radio or else you have to spend more for a radio.
Take some time reading threads and googling will help you.
Hiller450 chopper,Sky surfer v2,Wilga2000,450quad(building)

Rahulvyas

decide how much weight u want to carry, what u want it to do, your exact budget,etc
-2814 700kv Carbon Fiber 685mm Quadcopter ( tuning PIDs)
-Scratch build Hexacopter ( selling the parts) { almost sold}
-9xR - The best RADIO
-ST360quad (sold)
-kk2 (sold)

Student

maahinberi

Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

Avadhut10001

yes. i want to carry 1-2kg weight ... camera and other dropping

pls help !
Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

maahinberi

You can refer to this thread for getting an idea about what all you would need:
http://www.rcindia.org/multirotors/choosing-motors-and-the-propellers-for-quadcopter/

Read it completely. After getting a brief idea, then you can ask any specific doubts you have over here.
Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

Avadhut10001

Turnigy 9x with frsky

DIY flight controller quad , kk2.1.5 , dji 450 , DIY frame, 3d printing service

surajshah9

Hi there!

I am also doing some research as I want to build/purchase my own quad.  You can check this link out:-

http://oddcopter.com/2012/12/12/easy-diy-quadcopter-build-part-1-the-parts-list/

maahinberi

Parts are good. You can also use the following ESCs:
http://hobbyking.com/hobbyking/store/__9483__Mystery_30A_BEC_Brushless_Speed_Controller_Blue_Series_.html
http://hobbyking.com/hobbyking/store/__13429__HobbyKing_30A_BlueSeries_Brushless_Speed_Controller.html

You can also save some money if you are willing to scratch build the frame. It isn't very hard. All you need is Plywood and 1/2" square wooden booms.

The radio mentioned in that parts list is a very cheap option. I would suggest you to put in a little more money and buy atleast a 6 channel programmable radio. It will save you a lot of money later, as you won't have to buy another radio when you need a programmable one.

A word of advice, preferably do not order a radio from an international site as it gets stuck at customs. It would be better to order a radio from a local hobby shop.
Take a look at this:
http://www.rcbazaar.com/products/2011-avionic-rcb6i-24ghz-6ch-transmitter-with-receiver.aspx
Maahin Beri - Introduction and Hangar
Seagull Arising Star, Seagull Low Wing 40, AviSport (SPAD), Phoenix Scanner, VortexRC Speedster, Martian 220 Racing Quadcopter.

surajshah9

Thanks...will look into it.

irshtin

Hello to all .. I'm New to qquadcopters... I've got my tx from flysky .. Pls tell me from where should I buy the frame and other components since I request u all to give me suggestions about hobbyking .. and what will be the rates when compared with the ones I buy in India .. Pls help ...

K K Iyer

@irshtin,
Welcome to RC India.
Please do a little searching on this forum.
Adequate info is available.
You can start by looking at www.quadkopters.com
Then search for Mega list of RC outlets (on the home page of RCI)
There are now many Indian online stores with good reputation.
Best wishes.

sahilkit

i think sticking with quadkopters is a good idea for newbie.
Today might be a great and wonderful day. It depends on you.

irshtin

Thanks for your suggestions .. when I compared the rates from hobbyking,many items r heavily prized here when compared to hobbyking ..so I've made a decision to buy from hobbyking ... help me with it pls ...

Rcjabalpur

The items might be a little expensive here but I suggest you buy from India . If you take the shipping charges , time and customs in consideration you wont be buying from Hobbyking . If you buy from your local hobby shop you can return the damaged or defective items .
Hobbico next star | sky surfer V2 | .46 High wing trainer | O.S .46 Ax | O.S .46 La | O.S 55 AX | super tigre .10 motor | Spektrum DX5e | FUTABA 10J | Hitec X4 Eighty | Phoenix Scanner | Multiplex Twinstar ii

Acquiring soon |  no plans as of yet  |

The ultimate responsibility of the pilot is to fulfill the dreams of the countless millions of earthbound ancestors who could only stare skyward and wish.

K K Iyer

Bought 10meter 6mm rubber tube from Hobbyking for USD 3.69, say Rs200.
Ended up paying Rs 850, due to shipping cost...

One lives and learns.

As an experiment, compare the landed cost of say a 'Sunbird' kit for Hobbyking, against the price from RCB/RCD Bangalore.

miginstruments


SARANSH Lakra

use aluminium or plastic for frame.