Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: saintofinternet on October 17, 2013, 04:49:40 PM

Title: how to power the FS-9RB RX
Post by: saintofinternet on October 17, 2013, 04:49:40 PM
hey...

can we have a guide / steps on how give power to the FS-9RB RX from Flysky when building a Quad?

what voltage, amps required by the RX  and which battery wire to connect? directly or through FC??
Title: Re: Re: how to power the FS-9RB RX
Post by: aniket210696 on October 17, 2013, 06:52:38 PM
Google Google Google! search search search! what fc are you using?

Sent from a potato using a lamp
Title: Re: how to power the FS-9RB RX
Post by: saintofinternet on October 17, 2013, 10:36:08 PM
I am using  FS-9RB RX from Flysky


Google'ed a lot but to no luck. nothing about that RX wiring....

not even what voltage should be given and how?
Title: Re: how to power the FS-9RB RX
Post by: aniket210696 on October 17, 2013, 11:21:07 PM
fc as in flight controller.... kk2?
Title: Re: how to power the FS-9RB RX
Post by: SideWinder on October 18, 2013, 11:05:27 AM
I think you meant "FS-R8B" receiver that comes along with a FlySky TH9X Tx .Most receivers work in a range of 4.8v to 6v. It can be powered through a separate battery (nimh cells etc) or from an ESC having a BEC (battery eliminator circuit).

In case of a quad most of the FC's power the Rx from them which inturn are powered from esc's.
Text only | Text with Images