Print Page - how to verify HK board is flashed?

Title: how to verify HK board is flashed?
Post by: satyagupta on May 04, 2012, 09:27:04 PM

Yo guys,

I just now flashed my HK v2.1 board with xcopter, there was lights on my avrusb programmer but is there any way to check where it was programmed :headscratch: :headscratch: if yes then how?? :banghead:

Title: Re: how to verify HK board is flashed?
Post by: Dharmik on May 04, 2012, 09:32:29 PM

There is no way to check which firmware currently loaded. You can check eeprom values in lazyzero tool.

Title: Re: how to verify HK board is flashed?
Post by: spitfire on May 05, 2012, 04:52:12 AM

If you are using KKmulticopter flash tool by lazy zero then you get message in console by avrdude that firmware is flashed and verified.

RC India

RC Models => Multirotors => Topic started by: satyagupta on May 04, 2012, 09:27:04 PM