Hybrid quadrotor: The Bat from The Dark Knight Rises movie (how to build it)

Started by uavplayer, January 01, 2014, 10:57:48 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

uavplayer

Hello all!

I am currently in the process of building The Bat from The Dark Knight Rises movie. It's been a painstaking process thus far with numerous hours of drawing plans. Here are the plans thus far.

Electronics:
-(2) 5000mAh+ batteries. At least 3 cells
-(2) 1200kv quadrotor motors in rear
-(2) 50-70mm EDF's in front
-(1) 60-70mm EDF in rear
-Spektrum DX6i TX and RX with digital servo's

Frame Construction:
-Balsa Wood
-Bass Wood
-Some carbon fiber parts

Below is a simple diagram of motor alignment for the aircraft. Build Pictures to follow.

rcrcnitesh

Maker | Aeromodeller | Teenager

uavplayer


rcrcnitesh

No I don't but love them and will surely join your site when I start with a multi.
Maker | Aeromodeller | Teenager

uavplayer

Quote from: rcrcnitesh on January 02, 2014, 10:36:06 AM
No I don't but love them and will surely join your site when I start with a multi.

Thanks rcrcnitesh! Good luck!

aman1256

Hello uavplayer It is going to be very nice build will follow it and i will also surely join the club as soon as i start with multi :)

uavplayer

Quote from: aman1256 on January 02, 2014, 11:54:39 AM
Hello uavplayer It is going to be very nice build will follow it and i will also surely join the club as soon as i start with multi :)

Thanks aman1256! If you play other type of drone, you can join the club as well!