DJI Phantom 3 Controller Not Coming On

Started by GE, November 22, 2015, 06:24:41 PM

Previous topic - Next topic

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

GE

November 22, 2015, 06:24:41 PM
Hi, am having a problem with my P3 controller, it does not come on. I have left it on for charge but the lights do
not come on. Only time the lights come on is when the charger is plugged in, pull out the charger and it goes dead.
Is there anyone who has faced something similar and is there a repair solution ?

Cheers

GE, Mumbai

arun.sreelakam

Re:
#1
November 22, 2015, 07:23:25 PM
Did it worked earlier?
Turnigy i10|Flysky 9xb|Hoverfly quadcopter|Arduflyer apm 2.5 with gps|Pixhawk|Homemade micro night vapour|Homemade ornithopter(in progress)| Reptile Quad with Gopro Brushless gimbal | Naza v2| APM 2.6 with GPS | Micro quad self made | FrSky| v911 Helis | 1200mm Hexacopter with 5d gimbal | 1300mm x8 With Red Gimbal | 1000mm Octo|

chintal

#2
November 22, 2015, 09:00:40 PM
Is to the controller or the battery ?
if its the battery please check with other battery
Rcmumbai.com
Passion is Airborne

GE

#3
November 22, 2015, 09:28:44 PM
Hi, quite possible the controller battery is not working but how do I change...

GE

#4
November 22, 2015, 09:31:13 PM
yes, it worked earlier. This morning, I started up and suddenly the controller went off and the Phantom came down as it did not get a signal. Fortunately, it was only about 20 feet off the ground...

GE

vutonium

#5
December 01, 2015, 04:39:46 PM
You should try to contact DJI if it is still under warranty. The battery in a Phantom 3 Pro/Adv controller is a 2S1P 7.4V 6000mAh LiPo with a balance plug. You could attempt replacing it yourself if you are comfortable working with electronics.

GE

#6
December 01, 2015, 04:43:02 PM
Thank you for your response. Would you know where I can get the battery...perhaps I could try...

Cheers, GE
Print
Go Up Pages1
User actions