Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: roshan.dixit on January 05, 2015, 07:10:43 PM

Title: Is it possible to use the zenmuse h3-3d gimbal
Post by: roshan.dixit on January 05, 2015, 07:10:43 PM
 Is it possible to use the zenmuse h3-3d gimbal in a multirotor other than phantom  please help!


Thank you
Roshan
Title: Re: Is it possible to use the zenmuse h3-3d gimbal
Post by: roshan.dixit on January 06, 2015, 06:27:20 PM
Help anyone
Title: Re: Is it possible to use the zenmuse h3-3d gimbal
Post by: rcrcnitesh on January 06, 2015, 07:57:21 PM
Yes.
Title: Re: Is it possible to use the zenmuse h3-3d gimbal
Post by: chintal on January 06, 2015, 10:05:15 PM
If it has gcu yes
If it doesn't have it
You will have to buy one
Title: Re: Is it possible to use the zenmuse h3-3d gimbal
Post by: SphereHobbies on January 07, 2015, 06:43:01 AM
Hello Roshan

DJI supplies the Zenmuse H3-3D in two configurations.
1. Zenmuse H3-3D for Phantom 2. (This version has no GCU (gimbals control unit) as the GCU is integrated in Phantom 2 circuit.)
2. Zenmuse H3-3D Standard.(This version comes with GCU.)

You can buy/use the standard version with any DJI multicopter of your choice with any DJI multicopter controller (NAZA-M V2/WKM/A2). Please note that the Zenmuse H3-3D is not supported on NAZA-M lite. You would find useful videos on dji.com and youtube.

If you need any assistance, drop us a line or call us.

Regards,

Sphere Hobbies
Dealer for DJI Products.
Ahmedabad
+91-99251-20630
Text only | Text with Images