Just built my first quadcopter, connected everything, and....it doesn't turn on

Started by Cycloned, January 18, 2016, 10:11:56 PM

Previous topic - Next topic

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2 All
User actions

Cycloned

#25
January 19, 2016, 01:02:30 PM
I set it to that, still no change. Still constant beeping when I try to calibrate.

Cycloned

#26
January 19, 2016, 01:08:55 PM


Video of the problem.

Devanesan Andrews

#27
January 19, 2016, 01:11:32 PM
my dear... nothing could be understood from the video
Slope stick l Avispad l Futaba T6exp l RCB 6i l Easy Star 2|
Jr XG6| RCB IOS 10| Futaba 10CAG| Turnigy 9xr pro| Sky surfer|

Devanesan Andrews

#28
January 19, 2016, 01:12:03 PM
your procedure is wrong... for the calibration
Slope stick l Avispad l Futaba T6exp l RCB 6i l Easy Star 2|
Jr XG6| RCB IOS 10| Futaba 10CAG| Turnigy 9xr pro| Sky surfer|

Cycloned

#29
January 19, 2016, 01:19:13 PM
I connected everything, removed LiPo. Put throttle high, turned on Tx. Connected lipo and then this beeping happened ( this is second time Im powering APM board. I already powered it once to enter calibration mode).

What's wrong with the procedure?

Mohammed Naveed

#30
January 19, 2016, 02:46:27 PM
are you getting a red light on your RX? need pics of the rx with APM input connections and ESC with APM connection
Print
Go Up Pages 1 2 All
User actions