hello frnds. this is m first quadcopter. but it won't fly, i think the esc are not calibrating. when i provide throttle all four motor starts. but after few sec one or two motor start rotating fast. ??? ??? ???
plz suggest me what to do???
calibrate the escs. u can find videos on how to calibrate escs using kk board its simple.all the four motors has to start at once, if there is a delay then the problem is with esc calibration. do it first then reply.
i already calibrate my esc many times but it won't work
i also take help of my friend (he is in this field from last 14 years ) he also told me that esc are faulty. esc are not calibrating. can any one help me. which thing is faulty. esc or board
check out this link https://www.youtube.com/watch?v=kLaA36KYpQI (https://www.youtube.com/watch?v=kLaA36KYpQI)
ok. first of all remove the props while calibrating the escs. Remember safety is the first aspect u shd consider whether ur flying or setting. now as of I ve seen ur not doing the calibration in the right way. while calibrating the kk board u must hear a sound, tat I din found in ur video. I suggest u start the setup of ur fcb from scratch. but first remove all the props. there is a very nice video over youtube over how to setup the kk board. u take a pen n paper more down ask the steps then try to setup ur quad.lets se wat happens.
thanx sir, let me find video on youtube then i calibrate. if it works then ill post
okay bro no prob anytime.
I ll try to get tat link got u.
http://m.youtube.com/watch?v=qAyxyLMr6vg (http://m.youtube.com/watch?v=qAyxyLMr6vg)
maybe this ll help u out
miginstruments sir,
i did as u say. but the same problem persist.
maybe one of the esc is faulty. u can do one thing, there is a method of calibrating individual esc try to do tat. maybe u ll come to know bout the prob.
ok sir
hey bro dont cal me sir.