hello Jeevan, sunil,deramfly,
I made 15 of these boards last year and i have sold out all. I first of all made this after going thru, hundreds of posts in  the Multirotor forum of RC Groups. Since we have our own Manufacturing unit as well as Cadding group, i Designed the board and did the lay out. I procurred components for 15 sets, assembled them and sold 14/15 at almost the cost price. 1no,I am keeping myself
Now i do not want to make again and take the responsibility. Instead if any Local hobby store is willing, .
1. I can share the schematics.
2. BOM
3. Gerber files etc.
4. I also can assemble and test the boards and give.
for 1,2,3 since i own it i can give it free to the RC community.
for 4,  This is purely an option. LHS can assemble it else where also. However, if we are assembling and testing, there will be assembly charges as per our company norms.
pl see the board details here.
https://docs.google.com/file/d/0B7CHSuX5N-_kNzA5MDM1NzgtZTlmMi00MTk5LWJkNGItYmIxNDIxNjUzNTRh/edit?authkey=CIrMqrUG&pli=1




best regards
ashta

bes

Thanks for sharing Ashta Sir,  You are truely an inspiration for the rest of us. 
I would like to test out your board when you go out flying next week like you mentioned in the forum.  Where do you guys fly from?

thanks dreamfly. we fly at Hoskote. For Multiwii, we can fly anywhere. istay in BTM lay out.

I'wud surely like to meet you Ashta Sir.  Any directions to the Hoskote flying field?

Hoskote is listed in the mega list of fields, with Google Maps etc :

http://www.rcindia.org/rc-locations-and-clubs/mega-list-of-rc-fields-locations-clubs-in-india/

Thanks Anwar,  Hope to make it this week end.

here is a small video, showing the
Acro mode: Only Gyro
Level mode: Gyro+Accelerometer, (Corrects the level automatically)
Magnetometer: Gyro+Accelerometer+ Magnetometer. Auto Level +Head is held in position.
Will post the Altitude hold using Baro  another time.

Thanks for watching,


best regards
ashta

here is the multi Wii SE 2.0 with FTDI, by HK, launched today

This card has  additionally
FTDI  built in
Un used pins brought out thru FETs for further pgmning and usage
On board battery voltage monitoring
On board Beeper alrm drivers.
Up to 2Amp LED Drivers for external LEDs.
if there is a reqmnt of min 100, it should be able to make it around USD50.00

Ashta Bhai

Will review this soon (With this and the Crius GPS I2C Nav module), interestingly this one is compatible with I2C-GPS NAV Module and CN06 GPS rx, for GPS hold and RTH, GPS is U-blox NEO-6M GPS module, will be interesting to review this stuff, planning to put it on a big FPV model and send it for good, let us see how it spans out

also RCTimer is giving a better pricing (No FTDI, and higher shipping), so i guess for now HK is cheaper (Better than Crius or not i dunno) will see it in the review

sure Augustine. Good luck to you.

Ashta sir here is my quad after a few hours of tuning. still a lot of work is left. I am planning to connect an I2C GPS and a zigbee that I  have with me for a long time.... I was only able to repair it last week after the crash I had a few months back....
http://www.youtube.com/watch?v=5lXevAHH7Dk&list=UUvw0wbNcXTqaDZwvGgcw7eQ&index=1

sir,
i too required Full version with Gyro, accelerometer, Barometer and Magnetometer. u hv anything in stock

dear radhkrishna,
sorry, i do not have any more boards.
ashta

Hi Ashta Sir,
I need some pro advice on Co Axial build...Iam half way with the build...Expert Advice is welcome...