Note : This thread is intended to be a general discussion of the following chassis and as a place for discussing features or issues regarding the same.

Tarot TL250A







Parameters of the tarot 250A:

Wheelbase: 250MM
Empty rack height / assembly height: 43MM / 85.8MM
Empty frame length / assembly Length: 195MM / 288MM
Empty frame width / assembly width: 219MM / 315MM
Bottom headroom: 21.8MM
Empty weight / takeoff weight: 115G / 430G (including 2200MHA battery)

It even comes with landing skid.

Ongoing discussion at the following forum -
http://www.rcgroups.com/forums/showthread.php?t=2298606

Please share your flying experience, FPV Videos and other mods for this frame.

Here is my build for tarot TL250A

Full Carbon Fibre Frame with landing Skids
Flip 32 plus
Diatone 5030 props
DYS 2300KV Black Edition
Sunrise blheli slim esc 20A
Diy BEC
200 mw skyzone FPV
2200 mah wolf pack Lipo 25C
AUW - 415g

Stock landing gears are not up to the mark,broken down into two pieces after my first crash landing.

Made my own landing gears using shockers.

Very stable and light.Flight time around 10mins on 1500 mah 25C wildscorpion
Best thing is PDB.No wires visible at all soldered directly to FC and PDB.

Here are my pics..
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656028-183-ImageUploadedByTapatalk1426014235.746345.jpg
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656029-48-ImageUploadedByTapatalk1426014257.965774.jpg
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656030-179-ImageUploadedByTapatalk1426014298.796296.jpg
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656032-213-ImageUploadedByTapatalk1426014318.620360.jpg
http://static.rcgroups.net/forums/attachments/5/6/9/0/1/4/a7656034-92-ImageUploadedByTapatalk1426014340.384873.jpg

Sanjiv94 and foxrc same?
If it's with lipo, ur auw at 415 is very light, good job.

foxRC has three admins Sanjiv ,Pushpreet and Abhishek.AUW including Lipo 1500mah is 415 .Very light and agile copter