Print Page - my Quad

Title: my Quad
Post by: Nehutech on November 29, 2013, 04:16:43 PM

my Quad setup

Frame :- 450mm Quadcopter Frame V2 - Integrated PCB.
Motor :- Turnigy D2830 1000kv.
ESC :- Q- brain 25amp 4 in 1.
FCB :- KK 2.1
battery :- Turnigy neno-tech 2200mAh

any suggestion are welcome..... :bow:

Title: Re: my Quad
Post by: aniket210696 on November 29, 2013, 06:36:48 PM

that's a nice setup... i use the same motors for my tri with 1045 SF props. it takes off at around 20% throttle.... with 3 motors i get a flight time of 10-12 mins on a 2200...

Title: Re: my Quad
Post by: Nehutech on November 29, 2013, 10:57:02 PM

thanks :bow: :bow: :bow:

i m also going to use 1045 prop :giggle:

Title: Re: my Quad
Post by: jaspreet.guitar on November 30, 2013, 09:33:31 AM

Flash your ESCs with BLHeli firmware. This will give you a super stable quad.

Title: Re: my Quad
Post by: Nehutech on November 30, 2013, 01:56:06 PM

thanks JI ... :bow: :bow:

RC India

RC Models => Multirotors => Topic started by: Nehutech on November 29, 2013, 04:16:43 PM