Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: jeevan reddy on October 19, 2011, 06:46:27 PM

Title: my quadcopter build
Post by: jeevan reddy on October 19, 2011, 06:46:27 PM
hey frndz,
               i have received motors,esc's,control board,propellers,lipo charger safely from hemanth sir and started building...............................................these are few pics of my design....................
Title: Re: my quadcopter build
Post by: Dharmik on October 19, 2011, 09:11:54 PM
nice work mate.can you tell us motor to motor frame size?
Title: Re: my quadcopter build
Post by: jeevan reddy on October 20, 2011, 06:31:16 PM
dharmik sir,
              motor to motor spacing is 60cm ...................
Title: Re: my quadcopter build
Post by: munnammu on December 09, 2011, 02:55:41 PM
hi Jeevan,

May i know from where actually u got all the equipment/parts. BTW who is Hemanth here?
Title: Re: my quadcopter build
Post by: ganeev on March 09, 2012, 11:40:46 AM
could u plz give me hemant sir's contact no. or any way of contacting him...i need propellers too.
i'm trying to make a 2 rotor copter...hope i w'll succeed in it...
Title: Re: my quadcopter build
Post by: anwar on March 09, 2012, 12:16:06 PM
http://www.rcindia.org/profile/?u=2395 

Use PM.
Title: Re: my quadcopter build
Post by: mmeek on March 15, 2013, 07:24:02 PM
I am preparing a Quadcopter for my college science exibition.
I want guidance related to main control bord ang any thing related to programing on bord.
I know assembeling very well.

I have purchased following parts:


>>>Multiwii and Megapirate AIO Flight Controller w/FTDI (ATmega 2560) V2.0:

http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=31138

>>>Turnigy Talon Quadcopter (V2.0) Carbon Fiber Frame 550mm: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?

idProduct=22781

>>>NEO-6M GPS Module: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=31135

>>>10x4.5 SF Props 2pc Standard Rotation/2 pc RH Rotation (Black): http://hobbyking.com/hobbyking/store/uh_viewItem.asp?

idProduct=25824

>>>2.4Ghz AV FPV Receiver (Arduino Compatible): http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=26828

>>>XXD HW 30A Brushless Motor ESC:

>>>Hobbywing LED Program Card:

>>>Odin 2627KV 1500 Motor:

>>>FPV Transmitter & 1/3-inch CCD camera PAL: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=11964

>>>ZIPPY Flightmax 4000mAh 3S1P 20C: http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=7634

>>>Hobby King 2.4Ghz 6Ch Tx & Rx V2 (Mode 2): http://hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=9042
Title: Re: my quadcopter build
Post by: Shehwar on March 15, 2013, 08:06:40 PM
@mmeek I am 100% sure that the fpv will cause interference with the radio system.
I broke 3 props due to the same reason.
Rest all are very good products and don't need a second thought.
Title: Re: my quadcopter build
Post by: atulrajguru9 on March 24, 2013, 06:34:49 PM
if  TX RX are 2.4 and viedio links are aslo 2.4 then there are good chances of problem.

try video link on other channel i.e. 5.8 
Text only | Text with Images