Print Page - N32 Brushed flight controller incorrect channel mapping with fs-ia6b RX

Title: N32 Brushed flight controller incorrect channel mapping with fs-ia6b RX
Post by: ramarao on March 11, 2017, 02:41:58 PM

hi all
i purchased q100 micro quad kit fro quadkopters..i've connected N32 brushed controller to flysky Ia6B reciever through PPM .
everything is fine in cleanflight except channel mapping
channel are wrongly mapped
iam using MODE 2

channel 1 assign to throttle - wrong
channel 2 assign to ROLL - wrong
channel 3 assign to PITCH - wrong
channel 4 assign to YAW - correct
AUX 1 - angle mode - correct
AUX 2 - Horizon mode- correct

please help me to fix this
Thank you
RAMARAO

Title: Re: N32 Brushed flight controller incorrect channel mapping with fs-ia6b RX
Post by: ramarao on March 11, 2017, 04:03:47 PM

i founf fix for this

in this circled are u need change AETR till your channels show proper save and see result
like ATER or TERA like that change and save

RC India

RC Models => Multirotors => Topic started by: ramarao on March 11, 2017, 02:41:58 PM