Print Page - naze 32 with flysky

Title: naze 32 with flysky
Post by: anilntny on July 11, 2015, 01:49:51 PM

Hi,anyone with experience of connecting naze 32 to flysky reciever.i even fried on rx trying. :headscratch:

Title: Re: naze 32 with flysky
Post by: Darshan for multirotors on July 11, 2015, 02:09:26 PM

Maybe this diagram can help
https://www.google.co.in/search?q=naze+32&biw=360&bih=592&tbm=isch&source=lnms&sa=X&ei=sNWgVeX6L86jugSbob5o&ved=0CAgQ_AUoAw&dpr=2#tbm=isch&q=naze32+wiring&imgrc=SmDlXH8sbmm_eM%3A
And for the burning part of the rx try and remember that ground wire is to be facing the outside the rx

Title: Re: naze 32 with flysky
Post by: anilntny on July 12, 2015, 07:52:14 PM

I am yet to figure out how to connect flysky receiver with naze 32,it seems that clear cut instruction is lacking . :'(
I am planning to go back to cc3d for the time being.

Title: Re: naze 32 with flysky
Post by: saikat on July 12, 2015, 08:17:28 PM

http://www.dronetrest.com/t/flip32-naze32-flight-controller-guide/634

see the drawing - its pretty clear - you will have to go to the baseflight config app in google
chrome to enable the receiver

what firmware have you loaded ?

Title: Re: naze 32 with flysky
Post by: anilntny on July 13, 2015, 11:41:52 AM

@Saikat,thanks a lot for the link . :hatsoff:I got my issues solved.
The blunder I was doing is that I was connecting channel lead to battery on rx ,I did not consider the fact that the lead carried signal one,once I connected it to ch 1 on receiver ,it worked. :thumbsup:

RC India

RC Models => Multirotors => Topic started by: anilntny on July 11, 2015, 01:49:51 PM