Just made it, let me know ,

All I am waiting for is the Video goggles

Connected withmy HDTV and worked pretty fine.

 



Camstab in yaw direction ? 

good luck..

Good luck parichya

Quote from: akhilzid on February 14, 2015, 01:40:54 PM
Camstab in yaw direction ? 

May be for looking around for cops !

Quote from: sooraj.palakkad on February 14, 2015, 01:52:57 PM
May be for looking around for cops !

Quote from: sooraj.palakkad on February 14, 2015, 01:52:57 PM
May be for looking around for cops !

haha

yea i thought it was better to have a view in Yaw direction

Regarding the electronics though...
The antenna should be upwards ?
I didnt cluster the Radio Rx and the FPV Tx together , that's fine right ?

Also die the unbalanced weight due to the FPV LiPO i used the trims to balance the quad .. fine ?

Quote from: parichya.gautam on February 14, 2015, 04:49:43 PM
The antenna should be upwards ?

Yes, For your setup upwards is fine,

but the perfect direction is downwards and below all electronics.

Quote from: parichya.gautam on February 14, 2015, 04:49:43 PM
I didnt cluster the Radio Rx and the FPV Tx together , that's fine right ?

yes, always keep some gap between all transmitters/receivers.

Quote from: parichya.gautam on February 14, 2015, 04:49:43 PM
Also die the unbalanced weight due to the FPV LiPO i used the trims to balance the quad .. fine ?

Slight variations doesn't matter, but don't try with too much.

ok cool ...

I put the retracts back , so i can experiment with putting the antenna down , is it worth it ?

that lead to more weight and the antenna not safe with this frame and retracts.

i think its fine now with current setup.

ok cool



Will keep updated when the goggles comes...

So here it is Finally !

The final version , complete with the retracts I made.

Just awaiting the goggles to come and the reason i started making quads will be fulfilled

damn it , idk, one servo was showing some delay in pulling up the leg , i opened it to see inside and i REPENT it now , all gears went here and there ... Now its just lying here, and the others are useless too

SO...

I left the retracts and made suspension based Legs

Pretty cool

ALSO, made my camera more 'flexible'

See the pics .

Also, will open separate thread for the new developments, so that if others want to see specifically that, they may land up in the right place rather than going through an entire thread of a different context.


Video showing it in action:

https://www.youtube.com/watch?v=YRYldfJIgzM&feature=youtu.be