Hi Guys
I am building my first Hexacopter.
I am using Spektrum Dx6i Tx, Storm S600 Rx, KK Board V5.5 (pics attached).
I have flashed the board through KK Flash tool-XCopter V4.7 KK by kapteinkuk (Pic attached).
Uptil now I have bind the Tx and Rx, however I am unable to ARM the board even after trying different stick and trim inputs.
Need help urgently please.
Thanks
Hi,
Make sure your Channel 4 i.e Rudder stick has full rates and not 100%.
As the arming requires the rudder input at max. Increase the dual rate of ch 4 to 110%
ALso check if CH 4 is reverse or normal.
THe arming happens with throttle low and full right rudder stick for 5~10secs
regds