Text only | Text with Images

RC India

RC Models => Multirotors => Topic started by: niteenk on September 17, 2016, 11:01:55 PM

Title: Need help with ufo intruder receiver board
Post by: niteenk on September 17, 2016, 11:01:55 PM
Unfortunately i broke my ufo intruder receiver board and one of motor is disconnected. Is there any way i can fix this?(http://uploads.tapatalk-cdn.com/20160917/ed0ed4087ffe9a8aae4ec408bee86eb5.jpg)

Sent from my ONEPLUS A3003 using Tapatalk
Title: Re: Need help with ufo intruder receiver board
Post by: kiran rc on September 18, 2016, 08:26:52 AM
Scrap the blue substrate from the board where you see copper tracks( near broken edges),apply some flux and make a good solder joint. As well as use some superglue to bond the broken arm.
Title: Re:
Post by: niteenk on September 19, 2016, 06:20:25 AM
Thank you sir, i will try and let you know

Sent from my ONEPLUS A3003 using Tapatalk
Title: Re: Need help with ufo intruder receiver board
Post by: l.nawraj on January 14, 2017, 03:53:39 PM
Pl i need one intruder ufo drone receiver board. As it ixs out of functioning.
Text only | Text with Images