Hello RCI members,
I am building a micro quad. I have already bought Avionic 1818 3500KV motor from RCB. Also had bought some BullNose 3030 Propellers from Robu.in . The motors come with integrated prop savers. However after fixing the prop on the saver, as I increase throttle, initially there is a lot of vibration, and at some point the props came off the rubber band. I don't know which prop will be a good fit for the motor.  Can someone please help me in this?
Regards,
Dipanjan

edit: here is the motor link http://www.rcbazaar.com/product.aspx?productid=4084

OK, in the website, they have a chart using GWS 3 X 3. How can a GWS 3X3 fit on the motor?

This motor
http://www.hobbyking.com/hobbyking/store/__5380__C2020_Micro_brushless_Outrunner_3500kv_11g_.html
Is similar to the one I have bought. Does anyone have any experience with these? What prop do you use? I right now have Kingkong 5030, and 3030 and 4045 BullNose props. Can't seem to get it working

Have started to think I have bought a crap set of motors. Thought they would match the props listed at the website

Please help !

I have the same set of motors.I use one on my solar plane.
You won't be able to mount 3 blade props but 2 blade props shant be a problem.
Can you post a pic.
I'll be able to tell better.

And yes, I have run that motor on a 8x6 APC prop and it's well capable of that

Thanks a lot Prabal. I appreciate your concern
Well, I think I should rephrase my statement like:
I have bought a good set of motors with a crap set of Prop savers.
The rubber bands that came with the motors, couldn't keep the props in place, so I replaced them with ordinary rubber bands, and now the quad flies well.
On a side note, I am using a Naze 32 FC, initially flashed it with Baseflight, was having strange stability issues. Now have reflashed it using Cleanflight, and it works very well. Probably I did some wrong setup in baseflight, that'w why it didn't work for me, but still, Cleanflight rocks
Will post some pics and video later if possible  Thanks again.
Regards,
Dipanjan

All Variety of Propellers Starting from 3 inches to 12 inches at low price
http://www.edallhobby.com/en/44-propellers