Hi,
I am building my first quad, and i have made up the following list of parts required, request the pros to please confirm if its perfect or do i need to change anything.
1) 04 Nos. MOTORS: TURNIGY 2217; 1050 Kv; 20A
http://www.hobbyking.com/hobbyking/store/__5690__Turnigy_2217_16turn_1050kv_23A_Outrunner.html
2) 04 Nos. ESC: TURNIGY Plush 25amp Speed Controller
http://www.hobbyking.com/hobbyking/store/__2163__TURNIGY_Plush_25amp_Speed_Controller.html
3) 01 Nos. BATTERY: ZIPPY Flightmax 5000mAh 3S1P 20C
http://www.hobbyking.com/hobbycity/store/__8579__ZIPPY_Flightmax_5000mAh_3S1P_20C_.html
4) 01 Nos. PROCESSOR: Arduino Uno
http://arduino.cc/en/Main/ArduinoBoardUno
5) 06 Nos. PROPELLERS: 1047SF Combo
http://www.hobbyking.com/hobbyking/store/uh_viewItem.asp?idProduct=20864
6) 01 Nos. FRAME: Made up of Aluminium / wood
7) 01 Nos. RADIO CONTROLLER: Turnigy 9X 9Ch Transmitter
http://www.hobbyking.com/hobbyking/store/__8991__Turnigy_9X_9Ch_Transmitter_w_Module_8ch_Receiver_Mode_1_v2_Firmware_.html?gclid=CMX_yt2h37ECFZFt6wodrVgAjA
8) Misc: Wires, Landing skids, bolts & nuts, bullet connectors etc.
Also found this motor http://www.hobbyking.com/hobbyking/store/__17922__NX_4005_650kv_Brushless_Quadcopter_Motor.html
Could someone help me decide which one is better (between the two motors)?
I know there are umpteen number of threads on the forum with the same discussion, however i just wanted to double check if my setup was right.
I am also searching for a suitable camera, please suggest options. and does FPV mean live streaming? because that is what i am looking for.
Thank you for your replies.
As a rule of thumb, a motor with bigger diameter will usually be more suitable for multirotor application than the motor with smaller diameter. Bigger diameter motor generate more torque, hence can change speed quickly, which is important for stability.