Hi friends I am getting error in my kk2 board.

"Warning*
Sensor Raw Data
Data Out of Limits.
Check your settings.
Continue..."

But nothing works... No buttons work... As soon as we give power to this board this error comes and no other things come.

Please help me out..

Please find the attached image for the errror...

Place your copter on a flat surface make sure the board is mounted flat...
After that plug your lipo.. and arm it..
Will get solved

Sent from my GT-I9152 using Tapatalk 2

Arun thanks for the reply. I have tried all these. but the only thing I am getting on the screen as soon as I connect the lipo is this error.

Quote from: pravinxp on October 25, 2013, 07:53:57 AM
I have tried all these.

What are the other things that you have tried?

And are you sure none of the 4 buttons are working?

Did you also check the soldering on the back of the board?

I tried to check all the soldering in the back... It looks good....

Tried connecting all the ESC and RX still the same error

Tried only ESC -4 still the same

Tried only one ESC still the same

Tried long press on the button and long press on the buttons also but still the buttons does nothing...

Now have booked the Firmware update module and waiting for it to check whether its a firmware error...

If the soldering looks good, and the buttons are not working at all, then firmware update is the last resort i guess.

Just repeat the steps I suggested by plugging all the motors and reciever connection in the correct manner...
This is a common error message in kk2..
Try remounting everything..
You can check firmware issues as well..
Sent from my GT-I9152 using Tapatalk 2