Print Page - please help with pid settings for hexacopter

Title: please help with pid settings for hexacopter
Post by: chintal on December 14, 2013, 05:22:23 PM

i built a hexacopter with hobby king kk2.0 board fwv is 1.6
please help me with the pid settings
i want the hex to be as stable as it gets
thank you

Title: Re: please help with pid settings for hexacopter
Post by: chintal on December 14, 2013, 07:28:51 PM

please help guys ............

Title: Re: please help with pid settings for hexacopter
Post by: pravesh736 on December 14, 2013, 07:33:15 PM

http://www.rcgroups.com/forums/showthread.php?t=1675613

but rough guess is it should be around, pitch and roll 100 p gain, 45 i gain, yaw stock.
for 1.5-.7 kg hex, 550mm
self level setting- 70 and 28

Title: Re: please help with pid settings for hexacopter
Post by: chintal on December 14, 2013, 07:47:40 PM

its a 2.5kg hex

Title: Re: please help with pid settings for hexacopter
Post by: pravesh736 on December 14, 2013, 10:10:41 PM

then 130pgain, 60i gain is my guess...

Title: Re: Re: please help with pid settings for hexacopter
Post by: arun.sreelakam on December 15, 2013, 07:06:49 AM

How can one guess the gain values with oit knowing the size of the hexacopter...
Please provide us some more details like m2m distance, electronics used and so..

Sent from my GT-I9152 using Tapatalk 2

Title: Re: please help with pid settings for hexacopter
Post by: pravesh736 on December 15, 2013, 07:56:37 AM

experience.

Title: Re: please help with pid settings for hexacopter
Post by: chintal on December 15, 2013, 11:26:16 AM

f550 frame
20a esc from hobbywing
a2212 1000kv motors
10 * 4.5 inch props
3s 10000mah(10amp) battery
hobbyking kk2.0 board with firmware v 1.6
flysky 9hx tx/rx
all up weight is 2.4 - 2.5 kg (dont have electric scale so )
i guess that would help :)

RC India

RC Models => Multirotors => Topic started by: chintal on December 14, 2013, 05:22:23 PM