Custom Mobile holder

parichya.gautam · December 25, 2014, 04:16:34 AM

Wanted to get some aerial footage and didn't have any smaller cams nearby. So thought why not

Total weight of the quad ( all inclusive ) is 1200gm

And as usual, used the Mechanix kit i earlier used to create the RC TiltRotor Car and the Landing Skids

madaquif · December 25, 2014, 04:38:26 AM

my 2 cents ...again ...add some soft foam to reduce vibrations.....

is the all up weight with the phone on the quad and battery ?...??

parichya.gautam · December 25, 2014, 04:43:16 AM

ok, will do that. yes. all inclusive

utkarshg13 · December 25, 2014, 05:52:26 PM

Cool!!
I too did this but on my plane. Do take sufficient measures to reduce vibrations as much as possible. Also, does your phone has DIS(Digital Image Stabilization) because otherwise the image would be bad.

parichya.gautam · December 25, 2014, 06:37:03 PM

yea, will sponge it a bit , recorded a vid, and the vibration could be heard, BUT if muted, the video was perfect

chintal · December 25, 2014, 06:40:38 PM

Dont use a costly phone
You will regret it
U never know when it can crash

utkarshg13 · December 25, 2014, 07:49:51 PM

I agree with chintal.
Make sure your quad flies stable otherwise you may cry.

parichya.gautam · December 25, 2014, 07:53:09 PM

i don't plan to fly very high

parichya.gautam · December 25, 2014, 10:24:41 PM

Updated it.

No more vibration or jaggy feel. Plus its perfectly still now. And it stays even upside down